Audio Technica AT4050 Multi-Pattern Condenser Microphone

Audio Technica AT4050
Audio Technica AT4050

Audio Technica AT4050 Multi-Pattern Condenser Microphone

Product Code: AT4050

Buy Sell Sales Audio Technica AT4050

• Innovative side-address Mid-Side stereo microphone
• Engineered for professional recording, broadcast and sound reinforcement
• Independent cardioid and figure-of-eight condenser elements
• Switch selection of Mid-Side mode and two internally matrixed stereo modes
• Dual-diaphragm capsules

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Element Externally-polarized (DC bias) condenser
Polar Pattern Cardioid, Omnidirectional, Figure-of-Eight
Frequency Response 20 - 18,000 Hz
Low Frequency Roll-Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -36 dB (15.8 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Noise 17 dB SPL
Dynamic Range 132 dB, 1 kHz at Max SPL
Signal to Noise Ratio 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements 48 V DC, 4.2 mA typical
Switches Polar selection; Flat, roll-off; 10 dB pad (nominal)
Weight 510 g
Dimensions 7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case