Audio Technica AT2022 X/Y Stereo Microphone

Audio Technica AT2022
Audio Technica AT2022   

Audio Technica AT2022 X/Y Stereo Microphone

Product Code: AT2022

 Buy Sell Sales Audio Technica AT2022


Features

  • X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
  • User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
  • Provides the spatial impact and realism of a live sound field
    Battery operation allows use with most recording devices
  • Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
  • Ideal for general stereo recording and field sound capture
    Excellent channel separation
  • Works with a standard 1.5V AA battery (included)
  • Included fuzzy windscreen offers excellent wind protection

Designed specifically for stereo field recording, interviews and home recording, the compact and lightweight AT2022 is suitable as a handheld microphone as well as when mounted on a boom or camera. Ideal for recording reports, the AT2022 unidirectional condenser capsules provide you professional quality stereo, without the need for 48V phantom power. Its 1.5V AA battery enables you to connect to virtually any audio recorders. The capsules can be rotated 90 or 120 degrees, to control the stereo width of your recording, and fold completely for easy storage and transportation.

Element Condenser
Polar Pattern X/Y Stereo
Frequency Response 20 - 20,000 Hz
Low Frequency Roll-Off 150 Hz, 6 dB/octave 
Open Circuit Sensitivity  –41 dB (8.9 mV) re 1V at 1 Pa 
Channel Balance  < 2.5 dB 
Impedance  200 ohms 
Maximum input sound level  122 dB SPL, 1 kHz at 1% T.H.D. 
Dynamic Range 103 dB, 1 kHz at Max SPL 
Signal to Noise Ratio  75 dB, 1 kHz at 1 Pa 
Battery Type 1.5V AA/UM3
Battery Current / Life 1.2 mA / 500 hours typical (alkaline)
Switch Off, on/flat, on/roll-off 
Weight 270g
Dimensions 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter
Output Connector Integral 3-pin XLRM-type
Cable 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end 
Accessories Included Stand clamp; soft protective pouch