Audio Technica ATM250DE Dual-element Instrument Microphone

Audio Technica ATM250DE
Audio Technica ATM250DE   

Audio Technica ATM250DE Dual-element Instrument Microphone

Product Code: ATM250DE

Buy Sell Sales Audio Technica ATM250DE


Features

  • Proven dual-element design features two elements
  • Dynamic element with rare-earth magnet provides punch and attack
  • Condenser element captures the full audio spectrum
  • Perfect for kick drum, guitar amps and instrument use
  • Integral 80 Hz HPF switch and 10 dB pad
  • Rugged, all-metal design and construction

The ATM250DE dual-element instrument microphone features cardioid condenser and hypercardioid dynamic capsules combined in a single housing. Audio-Technica’s innovative use of two polar patterns is ideal for kick drum: the hypercardioid dynamic element focuses tightly on the aggressive attack of the beater, while the condenser captures the round tonalities of the shell. The elements are positioned in a perfect phase relationship, something practically impossible to achieve with two separate microphones. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.

Element Condenser, Dynamic
Polar Pattern Cardioid (condenser)
Hypercardioid (dynamic)
Frequency Response 40 - 20,000 Hz (condenser)
40 - 15,000 Hz (dynamic)
Open Circuit Sensitivity -49 dB (3.5 mV) re 1V at 1 Pa (condenser)
-53 dB (2.2 mV) re 1V at 1 Pa (dynamic)
Impedance 50 ohms (condenser)
600 ohms (dynamic)
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D. (condenser)
158 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 12 dB/octave (condenser)
Switches Flat, roll-off; 10 dB pad (condenser only)
Dynamic Range 122 dB, 1 kHz at Max SPL (condenser)
Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa (condenser)
Phantom Power Requirements 11-52V DC, 3.5 mA typical (condenser)
Weight 320 g
Dimensions 143.6 mm (5.65") long, 55.0 mm (2.17") diameter
Output Connector Integral 5-pin XLRM-type
Cable 5.0 m (16.5') dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
Accessories AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 adapter; soft protective pouch