Audio Technica ATM350 Cardioid Condenser Clip-On Microphone

Audio Technica ATM350
Audio Technica ATM350   

Audio Technica ATM350 Cardioid Condenser Clip-On Microphone

Product Code: ATM350

Buy Sell Sales Audio Technica ATM350


  • Attaches to brass, reeds, piano, acoustic bass, snare, toms and violin
  • UniMount® clip permits accurate positioning
  • Unique violin mount
  • Crisp, clear, well-balanced response, even at high SPLs
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear
  • Interchangeable elements available

Supplied with Audio-Technica's versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, violin and all percussive instruments. With its compact and discreet design, the ATM350 is able to fin into smaller spaces. The microphone offers a crisp, clear, well-balanced response, even at high SPLs.

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40 - 20,000 Hz
Open Circuit Sensitivity  -49 dB (3.5 mV) re 1V at 1 Pa
Impedance 50 ohms
Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.
Low Frequencey Roll Off 80 Hz, 12 dB/octave
Switches  Flat, roll-off 
Dynamci Range 122 dB, 1 kHz at Max SPL
Signal to Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Reqirements 11-52V DC, 3.5 mA typical
Weight Microphone: 14.5 g (0.5 oz)
Power module: 81.2 g (2.9 oz)
Dimensions Microphone: 37.8 mm (1.49") long, 12.2 mm (0.48") diameter
Power module: 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Output Connector Power module: Integral 3-pin XLRM-type
Cable  4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
Accessories AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch