Audio Technica AE2500 Dual-element Cardioid Instrument Microphone

Audio Technica AE2500
Audio Technica AE2500   

Audio Technica AE2500 Dual-element Cardioid Instrument Microphone

Product Code: AE2500

Buy Sell Sales Audio Technica AE2500


Features

  • Revolutionary dual-element design
  • Two elements (condenser and dynamic)
  • Dynamic element delivers the aggressive attack of the beater
  • Condenser captures the round tonalities of the shell
  • Robust design for enduring dependability on the road
  • Integral 80 Hz HPF switch and 10 dB pad on condenser element

The ultimate kick drum mic, Artist Elite AE2500 dual element microphone features both condenser and dynamic capsules in a perfect phase relationship, all in one housing. With a provided splitter cable, the separate elements can be control on different channels with their own 3 pin XLR connectors, allowing for a precise sound balance. The AE2500 is presented in a rugged durable casing, and is provided with a stand clamp offering shock protection, secure mounting and easy positioning. The AE2500 is equally at home on the road and in the studio

Element Condenser, Dynamic
Polar Pattern Cardioid
Frequency Response 20 - 17,000 Hz (condenser)
30 - 10,000 Hz (dynamic)
Open Circuit Sensitivity -51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
Impedance 100 ohms (condenser)
600 ohms (dynamic)
Maximum Imput Sound Level  148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
158 dB SPL, with 10 dB pad (nominal) 
Low Frequency Roll Off  80 Hz, 12 dB/octave (condenser) 
Dynamic Range  124 dB, 1 kHz at Max SPL (condenser) 
Signal-to-Noise Ratio  70 dB, 1 kHz at 1 Pa (condenser) 
Phantom Power Requirements  11-52V DC, 3 mA typical (condenser) 
Weight 390 g
Dimensions 6.50" (165.0 mm) long, 2.17" (55.0 mm) maximum diameter
Output Connector Integral 5-pin XLRM-type
Cable  16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors 
Accessories AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch