Extron XTP CP 4i VGA Board

XTP CP 4i VGA Board

Extron Universal Input Board with Analog Stereo Audio
Home > Extron > XTP CrossPoint Matrix Switchers > XTP CP 4i VGA Extron XTP CP 4i VGA BoardExtron XTP CP 4i VGA Board
 Extron XTP CP 4i VGA Board -  Universal Input Board with Analog Stereo Audio
Extron XTP CP 4i VGA Board
Product Code: XTPCP4iVGA
Buy Sell Sales Extron XTP CP 4i VGA Board

The XTP CP 4i VGA Input Board features universal video inputs that automatically detect incoming RGBHV, HD component video, S-video, and composite video signals. It provides the capability to connect a variety of local analog video sources to XTP Systems®. The XTP® board digitizes all incoming formats, and applies SD Pro processing to deinterlace 480i and 576i video signals for reliable display on a variety of output devices. It also features analog stereo audio inputs for independent routing of audio signals.

The XTP CP 4i VGA board switches high resolution video signals up to 1920x1200, including 1080p/60, and stereo audio. All incoming AV signals are digitized and can be switched to any XTP CP output board for local or remote signal distribution within XTP Systems. Extron-exclusive SD Pro processing ensures compatibility with HDMI and DVI-equipped displays, without the need for additional scalers. Other integrator-friendly features include automatic input format detection, a substantial variety of picture controls, and EDID Minder®, which automatically manages EDID communication between the source and destination, ensuring reliable transmission of the digitized signal.

Four balanced/unbalanced stereo audio inputs with audio breakaway capability, volume adjustment, and muting capabilities add switching and distribution flexibility. Audio signals are digitized to two-channel PCM digital audio for separate audio routing within the system. Audio breakaway provides the capability to separate audio signals from corresponding video signals for switching to different destinations. These digitized signals can also be embedded into the signal stream of the HDMI, DVI, and XTP twisted pair outputs.

Extron XTP Systems
Extron XTP Systems provide a completely integrated switching and distribution solution for multiple digital and analog formats. They support local connectivity as well as extended transmission capability for sending high resolution video, audio, RS-232, and Ethernet up to 330 feet (100 m) over a shielded CATx cable. Each system is HDCP compliant and delivers ultra-fast, highly reliable digital switching with Extron-exclusive SpeedSwitch® Technology.

At the heart of a system is an XTP CrossPoint® matrix switcher. The modular matrix switchers are expandable from 4x4 to 16x16 or 32x32, and can be populated with a wide variety of XTP CP I/O matrix boards. Input and output boards provide direct HDMI, DVI, VGA, video, and audio connections to local sources and displays or signal extension to remote endpoints when using XTP® transmitters and receivers. The matrix switcher can also provide power to a remote XTP device over the one twisted pair cable.

To configure, operate, and monitor the system in real time, user-friendly control software offers a complete view of all XTP devices from a computer. With hot-swappable modular components, a wide selection of XTP transmitters and receivers, and advanced 24/7 system monitoring, XTP Systems are designed to provide continuous, trouble-free operation in the most critical applications.
 
• Four universal inputs with stereo audio
• Accepts RGBHV, HD component video, S-video, and composite video — Each of the four universal inputs can accept RGBHV, HD component video, S‑video, or
composite video from analog sources for signal digitization and transmission through an XTP CrossPoint System.
• Supports computer-video to 1920x1200, including HDTV 1080p/60
• Auto input format detection — The XTP CP 4i VGA board detects the incoming signal format and automatically converts it to a digital TMDS signal for routing. This feature can reduce the number of required outputs for an XTP CrossPoint matrix switcher, lowering system cost while improving manageability.
• Analog-to-digital signal conversion — Analog signals are digitized, sending a reliable, high quality digital video signal to the destination.
• SD Pro processing provides deinterlacing of standard definition video — SD Pro processing deinterlaces 480i and 576i signals for compatibility with HDMI and DVI-equipped displays, without the need for additional scalers.
• Compatible with all XTP CP output boards — An XTP System is a flexible, reliable signal switching and distribution system that provides a completely integrated solution for multiple digital and analog formats.
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Local analog stereo audio inputs — The four balanced/unbalanced analog audio inputs are digitized to two-channel PCM digital audio for separate audio routing within the system.
• Picture and audio adjustments — Multiple picture adjustments are available including color, tint, contrast, brightness, and detail picture controls. Audio adjustments include local audio input level adjustment of +18 dB to -18 dB. Both audio and video can be muted.
• Hot-swappable — I/O boards can be added or removed without the need to power down the matrix switcher.
 

Video input — XTP CP 4i, XTP CP 4i DMA

   Number/signal type 

4 sets of proprietary twisted pair AV signals

   Connectors 

4 female RJ-45 per board

    NOTE    

Input comes from an Extron XTP Series twisted pair transmitter.

   Control/remote — external device (pass-through, unidirectional or bidirectional) 

      Serial control port input/output 

1 set of proprietary signals on a female RJ-45 jack

      Serial control port output/input 

RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)

      Baud rates 

Up to 115200 baud

      Protocol 

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

      Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = GND

      Ethernet pass-through port 

1 female RJ-45 connector

      Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

      IR control port 

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz

      IR control pin configuration 

3 = GND, 4 = IR Tx, 5 = IR Rx

Video output — XTP CP 4o

   Number/signal type 

4 sets of proprietary twisted pair AV signals

   Connectors 

4 female RJ-45 per board

    NOTE    

Output connects to an Extron XTP Series twisted pair receiver.

   Control/remote — external device (pass-through, unidirectional or bidirectional) 

      Serial control port input/output 

1 set of proprietary signals on a female RJ-45 jack

      Serial control port output/input 

RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)

      Baud rates 

Up to 115200 baud

      Protocol 

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

      Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = GND

      Ethernet pass-through port 

1 female RJ-45 connector

      Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

      IR control port 

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz

      IR control pin configuration 

3 = GND, 4 = IR Tx, 5 = IR Rx

Video — XTP CP 4i VGA

   Gain 

Unity

   Analog resolution range 

Up to 1920x1200* or 1080p (HDTV)
*reduced blanking

   Bandwidth 

300 MHz (-3 dB), fully loaded
0-10 MHz: no more than +0.1 dB to -0.1 dB
0-130 MHz: no more than +0.8 dB to -0.8 dB

   Crosstalk 

-88 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz

   Switching speed 

200 ms (max.)

 

Video input — XTP CP 4i VGA

   Number/signal type 

4 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video

   Connectors 

4 female 15-pin HD

   Nominal level 

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

   Minimum/maximum levels 

Analog: 0.5 V to 2.0 Vp-p with no offset

   Impedance 

75 ohms

   Return loss 

>30 dB @ 5 MHz

   DC offset (max. allowable) 

1.5 V

 

Video processing — XTP CP 4i VGA

   Decoder 

8 bit digital

   Digital sampling 

30 bit, 10 bits per color; 162 MHz standard

   Colors 

1 billion

 

Sync — XTP CP 4i VGA

   Input type 

RGBHV, RGBS, RGsB, RsGsBs

   Input level 

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

   Input impedance 

510 ohms

   Horizontal frequency 

30 kHz to 100 kHz

   Vertical frequency 

24 Hz to 120 Hz

   Max. propagation delay 

30 ns

   Max. rise/fall time 

4 ns

   Polarity 

Positive or negative

Video — XTP CP 4i DVI Pro, XTP CP 4o DVI Pro

    NOTE    

*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.

   Gain 

Unity

   Resolution range 

Up to 1920x1200*, 2k, or 1080p @ 60 Hz
*Reduced blanking

   Signal type 

Single link DVI digital video signals are supported.

   Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video) or 2k

       NOTE    

These XTP CP DVI Pro boards are compatible with HDMI.

      Digital audio 

Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.

      Consumer Electronics Control (CEC) 

Not supported

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Standards 

DVI 1.0, HDMI, HDCP 1.1

   Switching speed 

200 ns, max.

Video input — XTP CP 4i DVI Pro

   Number/signal type 

4 digital RGB single link DVI-D (or HDMI*)

   Connectors 

4 female DVI-I (digital only)

   Equalization 

Automatic

   Input cable length 

>100' (30 m) at 1920x1200, 2k, or 1080p @ 60 Hz

    NOTE    

The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — XTP CP 4o DVI Pro

   Number/signal type 

4 digital RGB single link DVI-D (or HDMI*)

   Connectors 

4 DVI-I (digital only)

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Video — XTP CP 4i HDMI, XTP CP 4i HDMI DMA, XTP CP 4o HDMI

    NOTE    

*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

   Gain 

Unity

   Resolution range 

Up to 1920x1200*, 2k, or 1080p @ 60 Hz
*Reduced blanking

   Signal type 

Single-link HDMI (or DVI-D*)

      Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz) or 2k

      Consumer Electronics Control (CEC) 

Not supported

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Standards 

DVI 1.0, HDMI, HDCP 1.1

   Switching speed 

200 ns, max.

Video input — XTP CP 4i HDMI, XTP CP 4i HDMI DMA

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Equalization 

Automatic

   Input cable length 

>100' (30 m) at 1920x1200, 2k, or 1080p @ 60 Hz

    NOTE    

The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — XTP CP 4o HDMI

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Audio input — XTP CP 4i DMA, XTP CP 4i HDMI DMA

   Supported formats — Pass through / down mix 

      XTP/HDMI connector 

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog connector 

Analog stereo audio

Audio — XTP CP 4i VGA, XTP CP 4o SA 

   Gain 

Unbalanced output: -6 dB; balanced output 0 dB

   Frequency response 

20 Hz to 20 kHz, ±0.05 dB

   THD + Noise 

0.03% @ 1 kHz at nominal level

   S/N 

>90 dB at maximum output (21 dBu, unweighted) (balanced)

   Crosstalk 

<-80 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>80 dB @ 1 kHz

   CMRR 

>75 dB @ 20 Hz to 20 kHz

Audio input — XTP CP 4i VGA

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats 

Analog stereo audio

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

0 dBu (0.775 Vrms)

   Maximum level 

+19.5 dBu, (balanced or unbalanced) at 1% THD+N

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

    NOTE    

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — XTP CP 4o SA

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats 

Analog stereo audio

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

±0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 0.1% THD+N

   Maximum level (600 ohm) 

>+15 dBm, balanced or unbalanced at 0.1% THD+N

   Volume control range 

-98 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

    NOTE    

Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Audio — XTP CP 4i DVI Pro, XTP CP 4o DVI Pro, XTP CP 4i HDMI, XTP CP 4o HDMI

   Gain 

Unbalanced output: -6 dB; balanced output 0 dB

   Frequency response 

20 Hz to 20 kHz, ±0.05 dB

   THD + Noise 

0.01% @ 1 kHz at nominal level

   S/N 

>105 dB at maximum output (21 dBu, unweighted) (balanced)

   Crosstalk 

<-89 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>105 dB @ 1 kHz

   CMRR 

>83 dB @ 20 Hz to 20 kHz

Audio input — XTP CP 4i DVI Pro, XTP CP 4i HDMI

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats — Pass through  

      HDMI/DVI Pro connector 

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog connector 

Analog stereo audio

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

+4 dBu (1.228 Vrms)

   Maximum level 

+21 dBu, (balanced or unbalanced) at 0.01% THD+N
+19.5 dBu, (balanced or unbalanced) at 1% THD+N

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

Audio output — XTP CP 4o DVI Pro, XTP CP 4o HDMI

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats — Pass through  

 

      HDMI/DVI Pro connector 

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog connector 

Analog stereo audio

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

±0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 1% THD+N

   Maximum level (600 ohm) 

>+20 dBm, balanced or unbalanced at 1% THD+N

   Volume control range 

-75.8 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

    NOTE    

Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Control/remote — switcher host ports

    NOTE    

The front panel USB port and rear panel RS-232 port are independent of each other and can be used at the same time.

   Serial host control port 

1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector

   Baud rate and protocol 

9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control

   Serial control pin configurations 

      RS-232 

2 = Tx, 3 = Rx, 5 = GND

      RS-422 

2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

   USB control port 

1 front panel female mini USB B

   USB standards 

USB 2.0, low speed

   Ethernet control port 

1 female RJ-45

   Ethernet data rate (for network communication) 

10/100Base-T, half/full duplex with autodetect

   Ethernet protocol 

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

   Ethernet default settings 

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

   Web server 

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

   Program control 

Extron XTP System Configuration Software for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet

General

   Power 

Internal
Input: 100-240 VAC, 50-60 Hz

      XTP CrossPoint 1600 

Redundant power supply is optional.

      XTP CrossPoint 3200 

Redundant power supply is standard.

   Power consumption 

 

      XTP CrossPoint 1600 

50 to 810 watts, depending on configuration

      XTP CrossPoint 3200 

100 to 1200 watts, depending on configuration

      Individual I/O boards 

TBD

   Remote power capability 

      XTP CrossPoint 1600 

Supports up to 28 endpoints

      XTP CrossPoint 3200 

Supports up to 24 endpoints.

   Temperature/humidity 

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

   Cooling 

Fan, right to left (as viewed from front panel)

   Mounting 

      Rack mount 

Yes

   Enclosure type 

Metal

   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)

      XTP CrossPoint 1600 

8.75" H x 17.0" W x 17.5" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 44.5 cm D)

      XTP CrossPoint 3200 

17.5" H x 17.0" W x 17.5" D (10U high, full rack wide)
(44.5 cm H x 43.2 cm W x 44.5 cm D)

   Product weight with boards installed 

      XTP CrossPoint 1600 

39.0 lbs (17.7 kg)

      XTP CrossPoint 3200 

59.0 lbs (26.8 kg)

   Shipping weight with boards installed 

      XTP CrossPoint 1600 

48 lbs (22 kg)

      XTP CrossPoint 3200 

71 lbs (33 kg)

   Shipping weight of individual boards, if purchased separately 

2 lbs (1 kg)

   DIM weight 

      XTP CrossPoint 1600 

         International 

53 lbs (24 kg)

      XTP CrossPoint 3200 

         USA/Canada 

76 lbs (35 kg)

         International 

89 lbs (48 kg)

   Vibration 

ISTA 1A in carton (International Safe Transit Association)

   Regulatory compliance 

      Safety 

CE, c-UL, UL

      EMI/EMC 

CE, C-tick, FCC Class A, ICES, VCCI

      Environmental 

Complies with the appropriate requirements of RoHS, WEEE.

   Warranty 

3 years parts and labor

    NOTE    

All nominal levels are at ±10%.

 
 
Products
Fiber Optic
XTP CrossPoint
XTP CP 4i VGA Board
XTP CP 4o SA Board
XTP CP DVI PRO I/O Board
XTP CP HDMI I/O Boards
XTP CP I/O Boards
XTP CP 1600 Series
XTP CP 3200 Series
XTP Matrix Blank Plate
Twisted Pair
Modular & Expandable
HDMI
DVI Switchers
SDI/HD-SDI
Ultra-Wideband RGB
Media Presentation
Scaling
VGA & Stereo Audio
AV Matrix Switchers

 

Extron 151214 Link  Link1  Link2 Singapore Dealer | distributor | reseller | where to buy in Singapore

Fiber Optic Matrix Switchers - FOB I/O 88 HD-SDI | SMX FOX Series | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 | SMX System MultiMatrix | FOX Matrix 320x | Matrix 1K |
XTP CrossPoint Matrix Switchers -
XTP CP 4i VGA Board | XTP CP 4o SA Board | XTP CP DVI PRO I/O Board | XTP CP HDMI I/O Boards | XTP CP I/O Boards | XTP CP 1600 Series |
XTP CP 3200 Series |
XTP Matrix Blank Plate |
Twisted Pair Matrrix Switchers -
MTPX 816 | MTPX 168 | MTPX 1616 | MTPX 1632 | MTPX 3216 | MTPX 3232 | MTPX PLUS 128 | MTPX PLUS 816 | MTPX PLUS 1616 | MTPX PLUS 3216 |
MTPX PLUS 168 | MTPX PLUS 1632 | MTPX PLUS 3232 | MTPX PLUS 6400 | MMX 32 VGA MTP |

Modular & Expandable Matrix Switchers -
ISM 824 | SMX System MultiMatrix | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 |
FOX Matrix 320x |
Matrix 1K | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series |
HDMI Switchers -
DTP CrossPoint 84 IPCP |
DXP HDMI Series | XTP CP 1600 Series | XTP CP 3200 Series | SMX System MulitMatrix | SMX HDMI Series |
DVI SWitchers -
DXP DVI Pro Series |
XTP CP 1600 Series | XTP CP 3200 Series | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | SMX DVI Series | SMX DVI Pro Series |
SDI/HD-SDI Switchers - HDXP Plus 3232 |
FOB I/O 88 HD-SDI | SMX Multi-Rate SDI Series | FOX Matrix 3200 | FOX Matrix 7200 | SMX System MultiMatrix |
Ultra-Wideband RGB Switchers - CrossPoint Ultra 84 | CrossPoint Ultra 88 | CrossPoint Ultra 128 |
CrossPoint Ultra 1212 | CrossPoint Ultra 168 | CrossPoint Ultra 1616 | CrossPoint 450Plus 2412 |
CrossPoint 450Plus 2424 | CrossPoint 450Plus 3216 | CrossPoint 450Plus 3232 | CrossPoint 450Plus 3248 | CrossPoint 450Plus 3264 | CrossPoint 450Plus 4832 | CrossPoint 450Plus 4848 |
CrossPoint 450Plus 4864 | CrossPoint 450Plus 6432 | CrossPoint 450Plus 6448 | CrossPoint 450Plus 6464 | ISM 824 | Matrix 12800 | Matrix 6400 Audio | Matrix 6400 Series | Matrix 3200 |
SMX Wideband Series | SMX Sync Series | SMX System MultiMatrix |
Media Presentation Matrix Switchers -
MPX 423 A | MPX 866 A | MPX Plus 866 A |
Scaling Matrix Switchers -
DTP CrossPoint 84 IPCP |
ISM 824 | ISM 482 |
VGA & Stereo Audio Matrix Switchers -
MMX 32 VGA A |
MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MVX 128 VGA A | MVX 168 VGA A | MVX 1212 VGA A |
SMX VGA Series | SMX System MultiMatrix |
AV Matrix Switchers  -
Composite Video  | MAV AV Series | MAV AV RCA Series | MAV 88 V | MAV Plus 88 AV | MAV Plus 816 AV | MAV Plus 128 AV | MAV Plus 168 AV | MAV Plus 1616 AV |
MAV Plus 2412 AV | MAV Plus 3232 AV |
MAV Plus 3248 AV | MAV Plus 3264 AV | MAV Plus 4832 AV | MAV Plus 4848 AV | MAV Plus 4864 AV | MAV Plus 6432 AV | MAV Plus 6448 AV |
MAV Plus 6464 AV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX System MultiMatrix |
S-Video - MAV SVA Series | MAV SVA RCA Series | MAV Plus 88 SV | MAV Plus 816 SV | MAV Plus 128 SV | MAV Plus 168 SV | MAV Plus 1616 SV | MAV Plus 2412 SV |
MAV Plus 2424 SV | MAV Plus 3216 SV | MAV Plus 3232 SV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX S-Video (2 BNC) Series |
SMX S-Video (4-pin DIN) Series) | SMX System MultiMatrix |
HDTV/Component - MMX 32 VGA A | MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MAV Plus 88 HD | MAV Plus 816 HD | MAV Plus 128 HD | MAV Plus 168 HD |
MAV Plus 1616 HD | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX Wideband Series | SMX System MultiMatrix |
Audio - MAV Plus 88 A | MAV Plus 164 A | MAV Plus 1616 A | MAV Plus 2424 A | MAV Plus 3248 A | MAV Plus 3264 A | MAV Plus 4832 A | MAV Plus 4848 A | MAV Plus 4864 A |
MAV Plus 6432 A | MAV Plus 6448 A | MAV Plus 6464 A | Matrix 12800 Series | Matrix 6400 Audio |
SMX Stereo Audio Series | SMX System MultiMatrix |

Portable air conditioner