Extron XTP Cross Point 1600 Series

XTP Cross Point 1600 Series

Extron Modular Digital Matrix Switchers from 4x4 to 16x16

Home > Extron > XTP CrossPoint Matrix Switchers > XTP Cross Point 1600 Series Extron XTP Cross Point 1600 SeriesExtron XTP Cross Point 1600 Series
 Extron XTP Cross Point 1600 Series - Modular Digital Matrix Switchers from 4x4 to 16x16
Extron XTP Cross Point 1600
Product Code:XTPCP1600SERIES
Buy Sell Sales Extron XTP CP 1600 Series

Extron Matrix Switchers
< HDMI Matrix Switchers

< DVI Matrix Switchers

The Extron XTP CrossPoint 1600 provides flexible, reliable digital and analog video switching and distribution between local and remote endpoints. This modular matrix switcher is configurable from 4x4 up to 16x16 using a wide variety of available input and output boards. It sends high-resolution video, audio, RS-232, Ethernet, and power up to 330 feet (100 m) over a shielded CATx cable to remote XTP® transmitters and receivers. The XTP CrossPoint 1600 also supports direct HDMI, DVI, VGA, video, and audio connections to local sources and displays. XTP Systems® deliver robust signal routing and reliability with ultra-fast digital video switching and advanced system monitoring.

XTP Systems are HDCP compliant and delivers ultra-fast, highly reliable digital switching with Extron exclusive SpeedSwitch® Technology. They include a wide range of integrator-friendly features such as EDID Minder®, Key Minder®, and advanced system monitoring and control capability.

An Extron XTP CrossPoint® matrix switcher is the heart of XTP Systems. The high speed, 15.2 Gbps data-rate digital backplane designed into the matrix switcher ensures full compatibility with the highest resolution signals currently in use, while also providing a future-ready upgrade path for new formats with higher resolutions such as 4K and Ultra HD - UHD video. Its modular design allows the system to be customized to the application, with available input and output boards providing local distribution of HDMI, DVI, VGA, video, and audio connections in addition to long-distance transmission to and from remote XTP transmitters and receivers. Each XTP board is hot-swappable so that the matrix switcher can be serviced or reconfigured without interrupting signal routing. Unoccupied board slots can be reserved for future system expansion.

XTP Systems also provide extensive audio signal routing and management features. Some of these features include integrating analog stereo audio alongside digital HDMI audio, HDMI audio embedding and de-embedding, audio breakaway, and downmixing multi-channel formats. In addition, the system can provide extension of Ethernet plus RS-232 and IR over the same shielded twisted pair cable as used for high resolution video and audio signal transmission. The use of a single twisted pair cable for multiple signals streamlines device operation and control, simplifies a cabling infrastructure, and reduces the need for added network drops.

Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ-45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron XTP Systems. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.

Easy Setup and Configuration
The XTP CrossPoint matrix switcher provides convenient, user-friendly control software, for configuring, operating, and monitoring the system. It includes many of the features common to Extron matrix switchers such as I/O memory presets and the QS-FPC™ - QuickSwitch Front Panel Controller with tri-color backlit buttons.

To enhance and simplify integration of digital and analog AV devices, the matrix switcher utilizes two Extron-exclusive technologies: EDID Minder and Key Minder. EDID Minder automatically manages EDID communication between all connected input sources. This technology allows EDID from any of the displays, or pre-stored selectable EDID information, to be assigned to any input. By maintaining continuous EDID communication with all sources, EDID Minder ensures that sources power up properly and reliably send content to the displays. For HDMI signals with protected content, Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure reliable switching while enabling simultaneous distribution of a single source signal to one or more displays. If an HDCP-encrypted signal is routed to a non-compliant display, a full-screen green signal is transmitted to the destination, providing immediate visual confirmation that protected content cannot be viewed on the selected display.

With the included software, EDID communication can easily be set for all devices. The software provides a complete view of the matrix switcher and remote XTP transmitters and receivers, and facilitates control and real-time status monitoring of all XTP devices through a computer.

System Monitoring and Control
The XTP CrossPoint matrix switcher can be controlled via RS-232, Ethernet, and the USB port on the front panel. With the capability to transmit control signals over the same CATx cabling as for AV, XTP Systems provide considerable flexibility to control the entire system. Bidirectional RS-232 signals can be inserted from a control system into the Ethernet port on the matrix switcher, enabling RS-232 control of devices attached to XTP transmitters and receivers.

Bidirectional RS-232 and IR insertion ports are included on the XTP CP input and output boards, transmitters, and receivers. These insertion ports allow, for example, a control system to insert IR signals into an XTP CP input board. The signals are then communicated to an XTP transmitter for controlling a Blu-ray Disc player. Similarly, the same control system can also insert RS-232 signals into an XTP CP output board for relay to an XTP receiver interfaced with a display device. All of this flexible system control capability is available using the same CATx cable to send control signals, alongside AV and Ethernet. The end result is a simplified wiring infrastructure that reduces costs and labor.

Extend Ethernet to Expand Network Access and AV Device Control
An Ethernet port accompanies each XTP RJ-45 port on an XTP transmitter or receiver, and the XTP CP input and output boards. These ports can be used to extend Ethernet access from the matrix switcher to remote endpoints over the same CATx cable, without the need to provide additional network drops or switches. For example, Blu-ray Disc players at the source endpoints can receive Internet access from the house LAN that is interfaced into the Ethernet ports of an XTP CP input board. A separate LAN for the control system can be used to control remote displays via the Ethernet ports on the XTP CP output boards.

The Ethernet ports on the XTP CP input and output boards can also be connected into a shared house LAN for both system control and network access. This also allows control system devices to be situated at remote endpoints. The capability to extend Ethernet to remote endpoints provides substantial flexibility to set LAN access in accordance with end-user requirements and IT policy.

Power Capabilities
As an added feature, the matrix switcher is capable of providing power to remote XTP devices using the same cable that transmits high resolution video, audio, RS-232 or IR, and Ethernet. The use of a single cable for AV, control, and power simplifies endpoint integration. The XTP CrossPoint 1600 rack-mountable 5U enclosure also allows for the addition of an optional redundant power supply, ensuring continuous operation in mission-critical installations.

With hot-swappable modular components, a wide selection of XTP transmitters and receivers, and advanced 24/7 system monitoring, the XTP CrossPoint 1600 is designed to provide continuous, trouble-free operation in the most critical applications.
 
• Available in I/O sizes from 4x4 to 16x16 — System configuration is flexible to match a wide variety of small to large-sized installations.
• 15.2 Gbps data-rate digital backplane — Ensures switching and distribution of video signals without degradation, offering the performance required to maintain signal integrity with the most demanding high resolution signals.
• Compatible with all XTP integrated system products — XTP Systems provide flexible, reliable signal switching and distribution in an integrated solution for multiple digital and analog formats.
• Fully digital signal routing — Analog signals are digitized, sending a reliable, high quality digital video signal to the output destination.
• Wide selection of input and output boards — Boards provide integration for a variety of signal types and formats, ensuring system customization appropriate for a wide range of applications.
• RS-232 insertion from the Ethernet control port — System level device control to all remote locations via the matrix switcher's Ethernet port, providing comprehensive control of endpoints and attached devices without needing additional cabling.
• Remote power to XTP transmitters and receivers — To simplify installation in space-challenged locations, an XTP CrossPoint matrix switcher can provide power to remote XTP transmitters and receivers over the same CATx cable as used for sending AV signals. This avoids the need to separately power XTP devices at remote endpoints.
• Supported HDMI specification features include data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
• HDCP compliant — Ensures display of content-protected media and interoperability with other HDCP-compliant devices.
• SpeedSwitch® Technology provides exceptional switching speed for HDCP-encrypted content
• SD Pro processing provides deinterlacing of standard definition video — SD Pro processing deinterlaces 480i and 576i signals for compatibility with HDMI and DVI-equipped displays, without the need for additional scalers.
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• Key Minder® continuously verifies HDCP compliance for quick, reliable switching — Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching in professional AV environments, while enabling simultaneous distribution of a single source to multiple displays.
• Automatic color bit depth management — The switcher automatically adjusts color bit depth output based on the display EDID, preventing color compatibility conflicts between source and display.
• HDMI to DVI Interface Format Correction — Automatically reformats HDMI source signals for output to a connected DVI display.
• Modular, field-upgradeable and hot-swappable design — The XTP CrossPoint matrix switcher provides substantial flexibility, expandability, and affordability by allowing users to select the configuration required for a system. Additional input and output boards may be added at any time for quick and easy upgradeability or expansion. Hot-swappable components allow the user to replace an I/O board at any time without the need to power down the switcher. This is especially useful for mission-critical applications that require continuous system operation.
• Audio breakaway — Provides the capability to separate an embedded audio signal from its corresponding video signal within the matrix switcher, allowing the audio and video signals from one source to be switched to different destinations.
• Ethernet extension — Centralized 10/100 Ethernet communication can be implemented via an Ethernet pass-through port to reduce the amount of independent network drops required within a system.
• HDMI and DVI output boards provide +5 VDC, 250 mA power on each output for powering external peripheral devices — Power provided via a board's digital output eliminates the need of a separate power supply for the connected peripheral device.
• Automatic cable equalization for each digital input to 100 feet (30 m) when used with Extron HDMI/DVI Pro cables — Cable input equalization optimizes signal performance for all incoming signals, ensuring pristine image quality is delivered throughout XTP Systems.
• Automatic output reclocking — Reshapes and restores timing of digital video signals at each output, eliminating high frequency jitter to ensure reliable transmission over long cables.
• HDCP authentication and signal presence confirmation via RS-232 or Ethernet — Provides real-time verification of HDCP status for each digital video input and output. This allows for simple, quick, and easy signal and HDCP verification through RS-232/RS-422 or Ethernet, providing valuable feedback to a system operator or helpdesk support staff.
• HDCP Visual Confirmation provides a green signal when encrypted content is sent to a non-compliant display — A full-screen green signal is sent when HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing immediate visual confirmation that protected content cannot be viewed on the display.
• Audio input gain and attenuation — Allows the level of gain or attenuation to be set, eliminating noticeable volume differences when switching between sources.
• Audio output volume adjustment and muting — Audio output can be set dynamically for each channel through the front panel or serial control eliminating the need for audio preamplifiers in many system designs.
• Ethernet monitoring and control — Engineered to meet the needs of professional AV environments, Ethernet control provides proactive monitoring and system management over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of input and output ties, adjustment and control of audio input and output levels, and advanced system diagnostics.
• Optional redundant power supply — An optional redundant power supply is available for the XTP CrossPoint 1600 for continuous, mission-critical applications where power reliability is crucial.
• Tri-color, backlit buttons — Buttons can be custom labeled for easy identification. The buttons illuminate red, green, or amber, depending on function, for ease of use in low-light environments.
• QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete button for each input and output, allowing for simple, intuitive operation.
• Global presets — Frequently used I/O configurations may be saved and recalled either from the front panel, serial, or Ethernet control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use.
• View I/O mode — Users can easily view which inputs and outputs are actively connected.
• Front panel configuration port — Enables easy configuration without having to access the matrix switcher's rear panel.
• Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the matrix switcher from the front panel controller.
• Optional remote control — The optional MKP 2000 and MKP 3000 X-Y Remote Control Panels provide the flexibility to control the matrix switcher from a remote location.
• Rack-mountable 5U, full rack width metal enclosure
• Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.

 

Video input — XTP CP 4i, XTP CP 4i DMA

   Number/signal type 

4 sets of proprietary twisted pair AV signals

   Connectors 

4 female RJ-45 per board

    NOTE    

Input comes from an Extron XTP Series twisted pair transmitter.

   Control/remote — external device (pass-through, unidirectional or bidirectional) 

      Serial control port input/output 

1 set of proprietary signals on a female RJ-45 jack

      Serial control port output/input 

RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)

      Baud rates 

Up to 115200 baud

      Protocol 

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

      Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = GND

      Ethernet pass-through port 

1 female RJ-45 connector

      Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

      IR control port 

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz

      IR control pin configuration 

3 = GND, 4 = IR Tx, 5 = IR Rx

Video output — XTP CP 4o

   Number/signal type 

4 sets of proprietary twisted pair AV signals

   Connectors 

4 female RJ-45 per board

    NOTE    

Output connects to an Extron XTP Series twisted pair receiver.

   Control/remote — external device (pass-through, unidirectional or bidirectional) 

      Serial control port input/output 

1 set of proprietary signals on a female RJ-45 jack

      Serial control port output/input 

RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)

      Baud rates 

Up to 115200 baud

      Protocol 

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

      Serial control pin configuration 

1 = Tx, 2 = Rx, 3 = GND

      Ethernet pass-through port 

1 female RJ-45 connector

      Ethernet data rate 

10/100Base-T, half/full duplex with autodetect

      IR control port 

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz

      IR control pin configuration 

3 = GND, 4 = IR Tx, 5 = IR Rx

Video — XTP CP 4i VGA

   Gain 

Unity

   Analog resolution range 

Up to 1920x1200* or 1080p (HDTV)
*reduced blanking

   Bandwidth 

300 MHz (-3 dB), fully loaded
0-10 MHz: no more than +0.1 dB to -0.1 dB
0-130 MHz: no more than +0.8 dB to -0.8 dB

   Crosstalk 

-88 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz

   Switching speed 

200 ms (max.)

Video input — XTP CP 4i VGA

   Number/signal type 

4 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video

   Connectors 

4 female 15-pin HD

   Nominal level 

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

   Minimum/maximum levels 

Analog: 0.5 V to 2.0 Vp-p with no offset

   Impedance 

75 ohms

   Return loss 

>30 dB @ 5 MHz

   DC offset (max. allowable) 

1.5 V

Video processing — XTP CP 4i VGA

   Decoder 

8 bit digital

   Digital sampling 

30 bit, 10 bits per color; 162 MHz standard

   Colors 

1 billion

Sync — XTP CP 4i VGA

   Input type 

RGBHV, RGBS, RGsB, RsGsBs

   Input level 

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

   Input impedance 

510 ohms

   Horizontal frequency 

30 kHz to 100 kHz

   Vertical frequency 

24 Hz to 120 Hz

   Max. propagation delay 

30 ns

   Max. rise/fall time 

4 ns

   Polarity 

Positive or negative

Video — XTP CP 4i DVI Pro, XTP CP 4o DVI Pro

    NOTE    

*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.

   Gain 

Unity

   Resolution range 

Up to 1920x1200*, 2k, or 1080p @ 60 Hz
*Reduced blanking

   Signal type 

Single link DVI digital video signals are supported.

      Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video) or 2k

       NOTE    

These XTP CP DVI Pro boards are compatible with HDMI.

 

      Digital audio 

Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.

      Consumer Electronics Control (CEC) 

Not supported

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Standards 

DVI 1.0, HDMI, HDCP 1.1

   Switching speed 

200 ns, max.

Video input — XTP CP 4i DVI Pro

   Number/signal type 

4 digital RGB single link DVI-D (or HDMI*)

   Connectors 

4 female DVI-I (digital only)

   Equalization 

Automatic

   Input cable length 

>100' (30 m) at 1920x1200, 2k, or 1080p @ 60 Hz

    NOTE    

The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — XTP CP 4o DVI Pro

   Number/signal type 

4 digital RGB single link DVI-D (or HDMI*)

   Connectors 

4 DVI-I (digital only)

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Video — XTP CP 4i HDMI, XTP CP 4i HDMI DMA, XTP CP 4o HDMI

    NOTE    

*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

   Gain 

Unity

   Resolution range 

Up to 1920x1200*, 2k, or 1080p @ 60 Hz
*Reduced blanking

   Signal type 

Single-link HDMI (or DVI-D*)

      Digital video 

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz) or 2k

      Consumer Electronics Control (CEC) 

Not supported

      EDID and DDC 

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.

      HDCP 

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards

      HPD 

Supports hot plug detection (HPD) of display as a pass-through signal.

   Maximum data rate 

6.75 Gbps (2.25 Gbps per color)

   Maximum pixel clock 

165 MHz

   Standards 

DVI 1.0, HDMI, HDCP 1.1

   Switching speed 

200 ns, max.

Video input — XTP CP 4i HDMI, XTP CP 4i HDMI DMA

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Equalization 

Automatic

   Input cable length 

>100' (30 m) at 1920x1200, 2k, or 1080p @ 60 Hz

    NOTE    

The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — XTP CP 4o HDMI

   Number/signal type 

4 digital RGB single-link HDMI (or DVI-D*)

   Connectors 

4 female HDMI type A

   Re-clocking 

Automatic

   Peripheral device power 

5 VDC, 250 mA per output

Audio input — XTP CP 4i DMA, XTP CP 4i HDMI DMA

   Supported formats — Pass through / down mix 

      XTP/HDMI connector 

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog connector 

Analog stereo audio

Audio — XTP CP 4i VGA, XTP CP 4o SA 

   Gain 

Unbalanced output: -6 dB; balanced output 0 dB

   Frequency response 

20 Hz to 20 kHz, ±0.05 dB

   THD + Noise 

0.03% @ 1 kHz at nominal level

   S/N 

>90 dB at maximum output (21 dBu, unweighted) (balanced)

   Crosstalk 

<-80 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>80 dB @ 1 kHz

   CMRR 

>75 dB @ 20 Hz to 20 kHz

Audio input — XTP CP 4i VGA

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats 

Analog stereo audio

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

0 dBu (0.775 Vrms)

   Maximum level 

+19.5 dBu, (balanced or unbalanced) at 1% THD+N

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

    NOTE    

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — XTP CP 4o SA

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats 

Analog stereo audio

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

±0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 0.1% THD+N

   Maximum level (600 ohm) 

>+15 dBm, balanced or unbalanced at 0.1% THD+N

   Volume control range 

-98 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

    NOTE    

Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Audio — XTP CP 4i DVI Pro, XTP CP 4o DVI Pro, XTP CP 4i HDMI, XTP CP 4o HDMI

   Gain 

Unbalanced output: -6 dB; balanced output 0 dB

   Frequency response 

20 Hz to 20 kHz, ±0.05 dB

   THD + Noise 

0.01% @ 1 kHz at nominal level

   S/N 

>105 dB at maximum output (21 dBu, unweighted) (balanced)

   Crosstalk 

<-89 dB @ 1 kHz, fully loaded

   Stereo channel separation 

>105 dB @ 1 kHz

   CMRR 

>83 dB @ 20 Hz to 20 kHz

Audio input — XTP CP 4i DVI Pro, XTP CP 4i HDMI

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats — Pass through  

 

      HDMI/DVI Pro connector 

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog connector 

Analog stereo audio

   Impedance 

>10k ohms unbalanced/balanced, DC coupled

   Nominal level 

+4 dBu (1.228 Vrms)

   Maximum level 

+21 dBu, (balanced or unbalanced) at 0.01% THD+N
+19.5 dBu, (balanced or unbalanced) at 1% THD+N

   Input gain adjustment 

-18 dB to +18 dB, adjustable per input; default = 0 dB

Audio output — XTP CP 4o DVI Pro, XTP CP 4o HDMI

   Number/signal type 

4 stereo, balanced/unbalanced

   Connectors 

(4) 3.5 mm captive screw connector, 5 pole

   Supported formats — Pass through  

 

      HDMI/DVI Pro connector 

LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel

      Analog connector 

Analog stereo audio

   Impedance 

50 ohms unbalanced, 100 ohms balanced

   Gain error 

±0.1 dB channel to channel

   Maximum level (Hi-Z) 

>+21 dBu, balanced or unbalanced at 1% THD+N

   Maximum level (600 ohm) 

>+20 dBm, balanced or unbalanced at 1% THD+N

   Volume control range 

-75.8 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)

    NOTE    

Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Control/remote — switcher host ports

    NOTE    

The front panel USB port and rear panel RS-232 port are independent of each other and can be used at the same time.

   Serial host control port 

1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector

   Baud rate and protocol 

9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control

   Serial control pin configurations 

      RS-232 

2 = Tx, 3 = Rx, 5 = GND

      RS-422 

2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

   USB control port 

1 front panel female mini USB B

   USB standards 

USB 2.0, low speed

   Ethernet control port 

1 female RJ-45

   Ethernet data rate (for network communication) 

10/100Base-T, half/full duplex with autodetect

   Ethernet protocol 

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

   Ethernet default settings 

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

   Web server 

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

   Program control 

Extron XTP System Configuration Software for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet

General

   Power 

Internal
Input: 100-240 VAC, 50-60 Hz

      XTP CrossPoint 1600 

Redundant power supply is optional.

      XTP CrossPoint 3200 

Redundant power supply is standard.

   Power consumption 

      XTP CrossPoint 1600 

50 to 810 watts, depending on configuration

      XTP CrossPoint 3200 

100 to 1200 watts, depending on configuration

      Individual I/O boards 

TBD

   Remote power capability 

      XTP CrossPoint 1600 

Supports up to 28 endpoints

      XTP CrossPoint 3200 

Supports up to 24 endpoints.

   Temperature/humidity 

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

   Cooling 

Fan, right to left (as viewed from front panel)

   Mounting 

      Rack mount 

Yes

   Enclosure type 

Metal

   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)

      XTP CrossPoint 1600 

8.75" H x 17.0" W x 17.5" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 44.5 cm D)

      XTP CrossPoint 3200 

17.5" H x 17.0" W x 17.5" D (10U high, full rack wide)
(44.5 cm H x 43.2 cm W x 44.5 cm D)

   Product weight with boards installed 

      XTP CrossPoint 1600 

39.0 lbs (17.7 kg)

      XTP CrossPoint 3200 

59.0 lbs (26.8 kg)

   Shipping weight with boards installed 

      XTP CrossPoint 1600 

48 lbs (22 kg)

      XTP CrossPoint 3200 

71 lbs (33 kg)

   Shipping weight of individual boards, if purchased separately 

2 lbs (1 kg)

   DIM weight 

      XTP CrossPoint 1600 

         International 

53 lbs (24 kg)

      XTP CrossPoint 3200 

         USA/Canada 

76 lbs (35 kg)

         International 

89 lbs (48 kg)

   Vibration 

ISTA 1A in carton (International Safe Transit Association)

   Regulatory compliance 

      Safety 

CE, c-UL, UL

      EMI/EMC 

CE, C-tick, FCC Class A, ICES, VCCI

      Environmental 

Complies with the appropriate requirements of RoHS, WEEE.

   Warranty 

3 years parts and labor

    NOTE    

All nominal levels are at ±10%.

 
 
Products
Fiber Optic
XTP CrossPoint
XTP CP 4i VGA Board
XTP CP 4o SA Board
XTP CP DVI PRO I/O Board
XTP CP HDMI I/O Boards
XTP CP I/O Boards
XTP CP 1600 Series
XTP CP 3200 Series
XTP Matrix Blank Plate
Twisted Pair
Modular & Expandable
HDMI
DVI Switchers
SDI/HD-SDI
Ultra-Wideband RGB
Media Presentation
Scaling
VGA & Stereo Audio
AV Matrix Switchers

 

Extron 151214 Link  Link1  Link2 Singapore Dealer | distributor | reseller | where to buy in Singapore

Fiber Optic Matrix Switchers - FOB I/O 88 HD-SDI | SMX FOX Series | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 | SMX System MultiMatrix | FOX Matrix 320x | Matrix 1K |
XTP CrossPoint Matrix Switchers -
XTP CP 4i VGA Board | XTP CP 4o SA Board | XTP CP DVI PRO I/O Board | XTP CP HDMI I/O Boards | XTP CP I/O Boards | XTP CP 1600 Series |
XTP CP 3200 Series |
XTP Matrix Blank Plate |
Twisted Pair Matrrix Switchers -
MTPX 816 | MTPX 168 | MTPX 1616 | MTPX 1632 | MTPX 3216 | MTPX 3232 | MTPX PLUS 128 | MTPX PLUS 816 | MTPX PLUS 1616 | MTPX PLUS 3216 |
MTPX PLUS 168 | MTPX PLUS 1632 | MTPX PLUS 3232 | MTPX PLUS 6400 | MMX 32 VGA MTP |

Modular & Expandable Matrix Switchers -
ISM 824 | SMX System MultiMatrix | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 |
FOX Matrix 320x |
Matrix 1K | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series |
HDMI Switchers -
DTP CrossPoint 84 IPCP |
DXP HDMI Series | XTP CP 1600 Series | XTP CP 3200 Series | SMX System MulitMatrix | SMX HDMI Series |
DVI SWitchers -
DXP DVI Pro Series |
XTP CP 1600 Series | XTP CP 3200 Series | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | SMX DVI Series | SMX DVI Pro Series |
SDI/HD-SDI Switchers - HDXP Plus 3232 |
FOB I/O 88 HD-SDI | SMX Multi-Rate SDI Series | FOX Matrix 3200 | FOX Matrix 7200 | SMX System MultiMatrix |
Ultra-Wideband RGB Switchers - CrossPoint Ultra 84 | CrossPoint Ultra 88 | CrossPoint Ultra 128 |
CrossPoint Ultra 1212 | CrossPoint Ultra 168 | CrossPoint Ultra 1616 | CrossPoint 450Plus 2412 |
CrossPoint 450Plus 2424 | CrossPoint 450Plus 3216 | CrossPoint 450Plus 3232 | CrossPoint 450Plus 3248 | CrossPoint 450Plus 3264 | CrossPoint 450Plus 4832 | CrossPoint 450Plus 4848 |
CrossPoint 450Plus 4864 | CrossPoint 450Plus 6432 | CrossPoint 450Plus 6448 | CrossPoint 450Plus 6464 | ISM 824 | Matrix 12800 | Matrix 6400 Audio | Matrix 6400 Series | Matrix 3200 |
SMX Wideband Series | SMX Sync Series | SMX System MultiMatrix |
Media Presentation Matrix Switchers -
MPX 423 A | MPX 866 A | MPX Plus 866 A |
Scaling Matrix Switchers -
DTP CrossPoint 84 IPCP |
ISM 824 | ISM 482 |
VGA & Stereo Audio Matrix Switchers -
MMX 32 VGA A |
MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MVX 128 VGA A | MVX 168 VGA A | MVX 1212 VGA A |
SMX VGA Series | SMX System MultiMatrix |
AV Matrix Switchers  -
Composite Video  | MAV AV Series | MAV AV RCA Series | MAV 88 V | MAV Plus 88 AV | MAV Plus 816 AV | MAV Plus 128 AV | MAV Plus 168 AV | MAV Plus 1616 AV |
MAV Plus 2412 AV | MAV Plus 3232 AV |
MAV Plus 3248 AV | MAV Plus 3264 AV | MAV Plus 4832 AV | MAV Plus 4848 AV | MAV Plus 4864 AV | MAV Plus 6432 AV | MAV Plus 6448 AV |
MAV Plus 6464 AV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX System MultiMatrix |
S-Video - MAV SVA Series | MAV SVA RCA Series | MAV Plus 88 SV | MAV Plus 816 SV | MAV Plus 128 SV | MAV Plus 168 SV | MAV Plus 1616 SV | MAV Plus 2412 SV |
MAV Plus 2424 SV | MAV Plus 3216 SV | MAV Plus 3232 SV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX S-Video (2 BNC) Series |
SMX S-Video (4-pin DIN) Series) | SMX System MultiMatrix |
HDTV/Component - MMX 32 VGA A | MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MAV Plus 88 HD | MAV Plus 816 HD | MAV Plus 128 HD | MAV Plus 168 HD |
MAV Plus 1616 HD | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX Wideband Series | SMX System MultiMatrix |
Audio - MAV Plus 88 A | MAV Plus 164 A | MAV Plus 1616 A | MAV Plus 2424 A | MAV Plus 3248 A | MAV Plus 3264 A | MAV Plus 4832 A | MAV Plus 4848 A | MAV Plus 4864 A |
MAV Plus 6432 A | MAV Plus 6448 A | MAV Plus 6464 A | Matrix 12800 Series | Matrix 6400 Audio |
SMX Stereo Audio Series | SMX System MultiMatrix |

Portable air conditioner