Extron SMX System MultiMatrix

SMX System MultiMatrix

Extron Digital and Analog Multi-Plane Modular Matrix Switcher
Home > Extron > Fiber Optic Matrix Switchers > SMX System MultiMatrix Extron SMX System MultiMatrixExtron SMX System MultiMatrix
 Extron SMX System MultiMatrix Digital and Analog Multi-Plane Modular Matrix Switcher
Extron SMX System Matrix
Product Code: SMXSYSTEMMULTIMATRIX
Buy Sell Sales Extron SMX System MultiMatrix

Extron Matrix Switchers
< Modular & Expandable

< HDMI Matrix Switchers
< DVI Matrix Switchers
< SDI/HD-SDI Switchers
< Ultra Wideband RGB Switchers

< VGA & Stereo Audio Switchers
< Composite Video Switchers
< S-Video Stereo Audio Matrix Switchers
< HDTV/Component Video & Stereo Audio Switchers

< Audio Switchers

The SMX System MultiMatrix Series of digital and analog multi-plane matrix switchers combines multiple, independent matrix switchers in a truly modular, field-configurable frame. Available in frame sizes from 2U to 5U, the SMX is capable of supporting up to 10 separate matrix boards for independent or simultaneous switching under a single point of control. It combines the proven reliability and high performance of Extron's CrossPoint®, MAV Plus, HDXP Plus, and MVX Series matrix switchers with the efficiency of a modular matrix switcher design. The SMX System is ideal for medical imaging systems, conference and training facilities, and other mid-sized applications that require the switching of different signal types in a cost-effective upgradable solution.
Combines multiple, independent digital and analog matrix switchers in a truly modular, field-configurable frame
• Choice of 2U, 3U, 4U, or 5U frames — Four frames provide four, six, eight, or ten matrix board slots, respectively.
• Choose from digital, analog, wideband, and stereo audio matrix boards — A full range of matrix boards is available for the SMX System MultiMatrix in I/O sizes of 4x4, 4x8, 8x4, 8x8, and 16x16.
• Single point of control for up to 10 separate switching planes — Up to 10 matrix boards can be installed in an SMX frame and controlled from a single SMX front panel controller or control port.
• Hot-swappable matrix board slots allow installation and replacement of matrix boards in three easy steps — Matrix boards can be changed or added without the need to disconnect power or remove the SMX frame from the equipment rack.
• Field re-configurable and updateable — Matrix boards can be installed, removed, or replaced in the field with a minimum amount of configuration and set up required.
• Enhanced QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete, backlit button for each input and output, allowing for simple, intuitive operation.
• Global presets — Frequently used I/O configurations may be saved and recalled either from the QS-FPC™ - QuickSwitch Front Panel Controller, Ethernet, or serial control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use.
• 10 presets per switching plane — Up to 10 presets per switching plane can be saved and recalled without affecting the other I/O plane connections.
• Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel controller.
• Virtual Plane Grouping — Switching planes can be grouped together to make a single, virtual switching plane. Plane grouping allows several signal planes to act as a single unit with a single control command affecting all planes.
• RS-232 and RS-422 control port — Using serial commands, the SMX System MultiMatrix can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 and RS-422 port also makes it easy to install firmware updates.
• Front panel configuration port — A 2.5 mm mini jack is available for set-up and configuring the SMX without having to access the unit from behind the rack.
• Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 and RS-422 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
• Ethernet monitoring and control — Engineered to meet the needs of professional AV environments, Ethernet control enables the SMX System MultiMatrix to be proactively monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of input and output ties, adjustment and control of audio input and output levels, and advanced system diagnostics.
• Rack-mountable metal enclosure — All SMX System MultiMatrix Switchers are housed in 19-inch wide metal enclosures.
• Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.
• Redundant Power Supply - On select models — SMX frames are available with a redundant power supply for mission-critical applications.
SMX System MultiMatrix Switchers

Video — composite video (SMX 84/88/1616 V)

   Routing 
      SMX 84 V  8 x 4 matrix
      SMX 88 V  8 x 8 matrix
      SMX 1616 V  16 x 16 matrix
   Gain  Unity
   Bandwidth  150 MHz (-3 dB), fully loaded
   Differential phase error  1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk  -60 dB @ 5 MHz
   Switching speed  100 ms (max.)

Video input — composite video (SMX 84/88/1616 V)

   Number/signal type  8 or 16 composite video, S/PDIF digital audio (not reclocked)
   Connectors  8 or 16 female BNC
   Nominal level  1 Vp-p for composite video
   Minimum/maximum levels  Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V

Video output — composite video (SMX 84/88/1616 V)

   Number/signal type  4, 8, or 16 composite video, S/PDIF digital audio (not reclocked)
   Connectors  4, 8, or 16 female BNC
   Nominal level  1 Vp-p for composite video
   Minimum/maximum levels  0.1 V to 2.0 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset

Sync — composite video (SMX 84/88/1616 V)

   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM

Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

   Routing 
      SMX 84 SV/YC  8 x 4 matrix
      SMX 88 SV/YC  8 x 8 matrix
      SMX 1616 SV/YC  16 x 16 matrix
   Gain  Unity
   Bandwidth  150 MHz (-3 dB), fully loaded
   Differential phase error  1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk  -60 dB @ 5 MHz
   Switching speed  100 ms (max.)

Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

   Number/signal type  8 or 16 S-video, composite video
   Connectors 
      SMX 84/88/1616 SV  8 or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC  8 or 16 x 2 female BNC
   Nominal level  1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V

Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

   Number/signal type  4, 8, or 16 S-video, composite video
   Connectors 
      SMX 84/88/1616 SV  4, 8, or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC  4, 8, or 16 x 2 female BNC
   Nominal level  1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.1 V to 2.0 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset

Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)

   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM

Video — wideband (SMX 84/88/1616 WB)

   Routing 
      SMX 84 WB  8 x 4 matrix
      SMX 88 WB  8 x 8 matrix
      SMX 1616 WB  16 x 16 matrix
   Gain  Unity
   Bandwidth  400 MHz (-3 dB), fully loaded
   Crosstalk
      8x8  -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz
      16x16  -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz
   Switching speed  200 ms (max.)

Video input — wideband (SMX 84/88/1616 WB)

   Number/signal type  8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)
   Connectors  8 or 16 female BNC
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-30 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V

Video output — wideband (SMX 84/88/1616 WB)

   Number/signal type  4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-30 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
   Switching type  Triple-Action

Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC

   Input type 
      SMX 88 SYNC, SMX 1616 SYNC  Composite sync (S)
      SMX 88 H+V  Separate H and V sync
   Output type (follows input) 
      SMX 88 SYNC, SMX 1616 SYNC  Composite sync (S)
      SMX 88 H+V  Separate H and V sync
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Max. propagation delay  35 ns
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)

Video — VGA (SMX 84/88/1616 VGA)

   Routing 
      SMX 84 VGA  8 x 4 matrix
      SMX 88 VGA  8 x 8 matrix
      SMX 1616 VGA  16 x 16 matrix
   Gain  Unity
   Bandwidth  350 MHz (-3 dB), fully loaded
   Crosstalk 
      8x8  -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz
      16x16  -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz
   Switching speed  200 ms (max.)

Video input — VGA (SMX 84/88/1616 VGA)

   Number/signal type  8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors  8 or 16 female 15-pin HD
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-36 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V

Video output — VGA (SMX 84/88/1616 VGA)

   Number/signal type  4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors  4, 8, or 16 female 15-pin HD
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-36 dB @ 5 MHz
   DC offset  ±6 mV with input at 0 offset
   Switching type  Triple-Action

Sync — VGA (SMX 84/88/1616 VGA)

   Input type  RGBHV, RGBS, RGsB, RsGsBs
   Output type  RGBHV, RGBS, RGsB, RsGsBs (follows input)
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Max. propagation delay  40 ns
   Max. rise/fall time  18 ns
   Polarity  Positive or negative (follows input)

Digital video — SMX 44/84/88/1616 SDI

   Routing 
      SMX 44 HD SDI  4 x 4 matrix
      SMX 84 HD SDI  8 x 4 matrix
      SMX 88 HD SDI  8 x 8 matrix
      SMX 1616 HD SDI  16 x 16 matrix
   Gain  Unity
   Maximum data rate  2.97 Gbps
   Data types  8 or 10 bit
   Operation standards  SMPTE 292M, SMPTE 259M, ITU-RBT.601, ITU-RBT.1120

Digital video input — SMX 44/84/88/1616 SDI

   Number/signal type  4, 8, or 16 single-link SDI, HD-SDI; or dual-link HD-SDI
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.80 Vp-p ± 10%
   Impedance  75 ohms
   Return loss  <-15 dB @ 1 MHz to 1.5 GHz
   Equalization  Automatic
   Input cable equalization distance
      HD-SDI 
         Extron SHR, Belden 1694A cable  500' (152 m)
         Extron HR, Belden 1505A cable  400' (122 m)
      SDI 
         Extron SHR, Belden 1694A cable  750' (229 m)
         Extron HR, Belden 1505A cable  550' (168 m)
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Digital video output — SMX 44/84/88/1616 SDI

   Number/signal type  4, 8, or 16 single-link SDI, HD-SDI; or dual-link HD-SDI
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.80 Vp-p ± 10%
   Impedance  75 ohms
   Return loss  <-15 dB @ 1 MHz to 1.5 GHz
   DC offset  ±0.5 V with input at 0 offset
   Re-clocking  Automatic, or use available bypass mode for nonstandard rates
   Jitter  <0.2 VI
   Rise/fall time (20-80%) 
      SDI  700 ps ±100 ps
      HD-SDI  250 ps ±100 ps

Video — SMX 44/48/84/88 DVI

    NOTE     *Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output.
   Routing
      SMX 44 DVI  4 x 4 matrix
      SMX 48 DVI  4 x 8 matrix
      SMX 84 DVI  8 x 4 matrix
      SMX 88 DVI  8 x 8 matrix
   Gain  Unity
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution range  Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz
   Signal type  Single-link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX DVI Series boards support TMDS data rates up to 4.95 Gbps and are not HDCP compliant.
      Digital audio  Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP  Not supported
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Standards  DVI 1.0, HDMI
   Switching speed  200 ns, max.

Video input — SMX 44/48/84/88 DVI

   Number/signal type  4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I
   Equalization  Automatic
   Input cable length  >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — SMX 44/48/84/88 DVI

   Number/signal type  4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I
   Re-clocking  Automatic
   Peripheral device power  250 mA per output

Video — SMX 44/48/84/88 DVI PRO

    NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
   Routing 
      SMX 44 DVI PRO  4 x 4 matrix
      SMX 48 DVI PRO  4 x 8 matrix
      SMX 84 DVI PRO  8 x 4 matrix
      SMX 88 DVI PRO  8 x 8 matrix
   Gain  Unity
   Resolution range  Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
   Signal type  Single-link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     The SMX DVI PRO Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI specification features.

**Extron strongly recommends compatibility testing while designing and before installing a 3D system. There are several different 3D formats in use by content providers and display manufacturers. 3D support in this product is limited to signals operating within a 165 MHz pixel clock and requires format and EDID compatibility between source and sink devices. Please contact an Extron Application Engineer for more information.

      Digital audio  Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  225 MHz
   Standards  DVI 1.0, HDMI
   Switching speed  200 ns, max.

Video input — SMX 44/48/84/88 DVI PRO

   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I (digital only)
   Equalization  Automatic
   Input cable length  >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — SMX 44/48/84/88 DVI PRO

   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I (digital only)
   Re-clocking  Automatic
   Peripheral device power  250 mA per output

Video — SMX 44/48/84/88 HDMI

    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
   Routing 
      SMX 44 HDMI  4 x 4 matrix
      SMX 48 HDMI  4 x 8 matrix
      SMX 84 HDMI  8 x 4 matrix
      SMX 88 HDMI  8 x 8 matrix
   Gain  Unity
   Resolution range  Up to 1920x1200 or 1080p @ 60 Hz
   Signal type  Single-link HDMI (or DVI-D*)
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     The SMX HDMI Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI specification features.

**Extron strongly recommends compatibility testing while designing and before installing a 3D system. There are several different 3D formats in use by content providers and display manufacturers. 3D support in this product is limited to signals operating within a 165 MHz pixel clock and requires format and EDID compatibility between source and sink devices. Please contact an Extron Application Engineer for more information.

      Digital audio  Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  225 MHz
   Standards  DVI 1.0, HDMI
   Switching speed  200 ns, max.

Video input — SMX 44/48/84/88 HDMI

   Number/signal type  4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
   Connectors  4 or 8 female HDMI type A
   Equalization  Automatic
   Input cable length  >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — SMX 44/48/84/88 HDMI

   Number/signal type  4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
   Connectors  4 or 8 female HDMI type A
   Re-clocking  Automatic
   Peripheral device power  250 mA per output

Optical specifications — SMX 88/1616 FOX Fiber Optic I/O board

    NOTE     The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
   Number/type  8 or 16 singlemode, or 8 or 16 multimode fiber optic inputs and outputs per I/O board
    NOTE     Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
   Connectors  16 or 32 LC connectors per I/O board
   Operating distance 
      Single mode  30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit
      Multimode  300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit
    NOTE     Operating distance is approximate.  These are typical distances.  The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength  850 nm for multimode (MM), 1310 nm for singlemode (SM)
   Transmission power 
      Singlemode  -5 dBm, typical
      Multimode  -5 dBm, typical
   Optical loss budget 
      Single mode  12 dB, maximum
      Multimode  7 dB, maximum
   Maximum channel data rate  4.25 Gbps

Video — SMX 88/1616 FOX

   Routing  8 x 8 or 16 x 16 unidirectional (Tx) matrix or
4 x 4 or 8 x 8 bidirectional (Tx/Rx) matrix
   Gain  Unity
   Pixel data bit depth  8 bits per channel, 3 channels (R, G, B)

Video/audio input — SMX 88/1616 FOX

   Number/signal type  8 or 16 fiber optic signalsQ
   Connectors mkm 8 or 16 LC connectors per I/O board
    NOTE     Input comes from an Extron fiber optic transmitter or fiber optic distribution amplifier.

Video/audio output — SMX 88/1616 FOX

   Number/signal type  8 or 16 fiber optic signals
   Connectors  8 or 16 LC connectors per I/O board
    NOTE     Output connects to an Extron fiber optic receiver.

USB — SMX 44/84 USB

   USB specification  USB 2.0 compatible
   USB data rates  Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)

USB input — SMX 44/84 USB

   Connectors  4 or 8 female USB type B

USB output — SMX 44/84 USB

   Connectors  8 female USB type A

Audio — SMX 84/88/1616A (analog)

   Routing 
      SMX 84 A  8 x 4 stereo matrix
      SMX 88 A  8 x 8 stereo matrix
      SMX 1616 A  16 x 16 stereo matrix
   Gain  Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response  20 Hz to 20 kHz, ±0.05 dB
   THD + Noise  0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >102 dB at maximum output (21 dBu, unweighted) (balanced)
   Crosstalk  <-95 dB @ 1 kHz, fully loaded
   Stereo channel separation  >98 dB @ 1 kHz
   CMRR  >70 dB @ 20 Hz to 20 kHz

Audio input — SMX 84/88/1616 A (analog)

   Number/signal type  8 or 16 stereo, balanced/unbalanced
   Connectors  (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance  >10k ohms unbalanced/balanced, DC coupled
   Nominal level  0 dBu (0.775 Vrms)
   Maximum level  +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment  –18 dB to +24 dB, adjustable per input; default = 0 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — SMX 84/88/1616 A (analog)

   Number/signal type  4, 8, or 16 stereo, balanced/unbalanced
   Connectors  (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Maximum level (Hi-Z)  >+21 dBu, balanced or unbalanced at 0.1% THD+N
   Maximum level (600 ohm)  >+15 dBm, balanced or unbalanced at 0.1% THD+N
   Volume control range  -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.

Control/remote — switcher host ports

   Serial host control port  1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
   Baud rate and protocol  9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin female D connector 
         RS-232  2 = Tx, 3 = Rx, 5 = Gnd
         RS-422  2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+
      Mini stereo jack 
         RS-232  Tip = Tx, ring = Rx, sleeve = Gnd
   Ethernet control port  1 female RJ-45
   Ethernet data rate
(for network communication) 
10/100Base-T, half/full duplex with autodetect
   Ethernet protocol  ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
   Ethernet default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server  Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory
   Program control  Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet

General

   Power supply  Internal, with or without redundant power supply
Input: 100-240 VAC, 50-60 Hz
   Power consumption  15.0 to 180 watts, depending on configuration
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Fan, left to right (as viewed from front panel)
   Thermal dissipation, full load  50 to 620 BTU/hr, depending on configuration
   Mounting 
      Rack mount  Yes
   Enclosure type  Metal
   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)
      SMX 200 Frame  3.5" H x 17.0" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 30.5 cm D)
      SMX 300 Frame  5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
      SMX 400 Frame  7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D)
      SMX 500 Frame  8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D)
   Product weight with boards installed
      SMX 200 Frame  16.2 lbs (7.3 kg)
      SMX 300 Frame  18.1 lbs (8.2 kg)
      SMX 400 Frame  20.3 lbs (9.2 kg)
      SMX 500 Frame  23.9 lbs (10.8 kg)
   Shipping weight with boards installed
      SMX 200 Frame  20 lbs (10 kg)
      SMX 300 Frame  22 lbs (10 kg)
      SMX 400 Frame  26 lbs (12 kg)
      SMX 500 Frame  30 lbs (14 kg)
   Shipping weight of individual boards,  if purchased separately 
      SMX 88 FOX  2 lbs (1 kg)
      SMX 1616 FOX  3 lbs (2 kg)
   DIM weight 
      SMX 400 Frame  30 lbs (14 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, KCC, VCCI
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
 
 
Products
Fiber Optic
FOB I/O 88 HD-SDI
SMX FOX Series
FOX Matrix 3200
FOX Matrix 7200
FOX Matrix 14400
SMX System MultiMatrix
FOX Matrix 320x
Matrix 1K
XTP CrossPoint
Twisted Pair
Modular & Expandable
HDMI
DVI Switchers
SDI/HD-SDI
Ultra-Wideband RGB
Media Presentation
Scaling
VGA & Stereo Audio
AV Matrix Switchers

 

Extron 151214 Link  Link1  Link2 Singapore Dealer | distributor | reseller | where to buy in Singapore

Fiber Optic Matrix Switchers - FOB I/O 88 HD-SDI | SMX FOX Series | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 | SMX System MultiMatrix | FOX Matrix 320x | Matrix 1K |
XTP CrossPoint Matrix Switchers -
XTP CP 4i VGA Board | XTP CP 4o SA Board | XTP CP DVI PRO I/O Board | XTP CP HDMI I/O Boards | XTP CP I/O Boards | XTP CP 1600 Series |
XTP CP 3200 Series |
XTP Matrix Blank Plate |
Twisted Pair Matrrix Switchers -
MTPX 816 | MTPX 168 | MTPX 1616 | MTPX 1632 | MTPX 3216 | MTPX 3232 | MTPX PLUS 128 | MTPX PLUS 816 | MTPX PLUS 1616 | MTPX PLUS 3216 |
MTPX PLUS 168 | MTPX PLUS 1632 | MTPX PLUS 3232 | MTPX PLUS 6400 | MMX 32 VGA MTP |

Modular & Expandable Matrix Switchers -
ISM 824 | SMX System MultiMatrix | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | FOX Matrix 3200 | FOX Matrix 7200 | FOX Matrix 14400 |
FOX Matrix 320x |
Matrix 1K | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series |
HDMI Switchers -
DTP CrossPoint 84 IPCP |
DXP HDMI Series | XTP CP 1600 Series | XTP CP 3200 Series | SMX System MulitMatrix | SMX HDMI Series |
DVI SWitchers -
DXP DVI Pro Series |
XTP CP 1600 Series | XTP CP 3200 Series | DMS 1600 | DMS 3600 | DMS 2000 | DMS 3200 | SMX DVI Series | SMX DVI Pro Series |
SDI/HD-SDI Switchers - HDXP Plus 3232 |
FOB I/O 88 HD-SDI | SMX Multi-Rate SDI Series | FOX Matrix 3200 | FOX Matrix 7200 | SMX System MultiMatrix |
Ultra-Wideband RGB Switchers - CrossPoint Ultra 84 | CrossPoint Ultra 88 | CrossPoint Ultra 128 |
CrossPoint Ultra 1212 | CrossPoint Ultra 168 | CrossPoint Ultra 1616 | CrossPoint 450Plus 2412 |
CrossPoint 450Plus 2424 | CrossPoint 450Plus 3216 | CrossPoint 450Plus 3232 | CrossPoint 450Plus 3248 | CrossPoint 450Plus 3264 | CrossPoint 450Plus 4832 | CrossPoint 450Plus 4848 |
CrossPoint 450Plus 4864 | CrossPoint 450Plus 6432 | CrossPoint 450Plus 6448 | CrossPoint 450Plus 6464 | ISM 824 | Matrix 12800 | Matrix 6400 Audio | Matrix 6400 Series | Matrix 3200 |
SMX Wideband Series | SMX Sync Series | SMX System MultiMatrix |
Media Presentation Matrix Switchers -
MPX 423 A | MPX 866 A | MPX Plus 866 A |
Scaling Matrix Switchers -
DTP CrossPoint 84 IPCP |
ISM 824 | ISM 482 |
VGA & Stereo Audio Matrix Switchers -
MMX 32 VGA A |
MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MVX 128 VGA A | MVX 168 VGA A | MVX 1212 VGA A |
SMX VGA Series | SMX System MultiMatrix |
AV Matrix Switchers  -
Composite Video  | MAV AV Series | MAV AV RCA Series | MAV 88 V | MAV Plus 88 AV | MAV Plus 816 AV | MAV Plus 128 AV | MAV Plus 168 AV | MAV Plus 1616 AV |
MAV Plus 2412 AV | MAV Plus 3232 AV |
MAV Plus 3248 AV | MAV Plus 3264 AV | MAV Plus 4832 AV | MAV Plus 4848 AV | MAV Plus 4864 AV | MAV Plus 6432 AV | MAV Plus 6448 AV |
MAV Plus 6464 AV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX System MultiMatrix |
S-Video - MAV SVA Series | MAV SVA RCA Series | MAV Plus 88 SV | MAV Plus 816 SV | MAV Plus 128 SV | MAV Plus 168 SV | MAV Plus 1616 SV | MAV Plus 2412 SV |
MAV Plus 2424 SV | MAV Plus 3216 SV | MAV Plus 3232 SV | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX S-Video (2 BNC) Series |
SMX S-Video (4-pin DIN) Series) | SMX System MultiMatrix |
HDTV/Component - MMX 32 VGA A | MVX 44 VGA A | MVX 84 VGA A | MVX 88 VGA A | MVX 32 VGA MTP | MAV Plus 88 HD | MAV Plus 816 HD | MAV Plus 128 HD | MAV Plus 168 HD |
MAV Plus 1616 HD | Matrix 12800 Series | Matrix 3200 Series | Matrix 6400 Audio | Matrix 6400 Series | SMX Composite Video Series |
SMX Wideband Series | SMX System MultiMatrix |
Audio - MAV Plus 88 A | MAV Plus 164 A | MAV Plus 1616 A | MAV Plus 2424 A | MAV Plus 3248 A | MAV Plus 3264 A | MAV Plus 4832 A | MAV Plus 4848 A | MAV Plus 4864 A |
MAV Plus 6432 A | MAV Plus 6448 A | MAV Plus 6464 A | Matrix 12800 Series | Matrix 6400 Audio |
SMX Stereo Audio Series | SMX System MultiMatrix |

Portable air conditioner