Clear-Com PRC-2 receiver beltpack

PRC-2

Clear-Com IFB Receiver Beltpack

Clear-Com PRC-2 receiver beltpack

  Homepage | Clear Com | Datavideo | DPA  |  MackieEvent  | Yamaha  |  Steinberg |  JBL  | Sound Devices |  Azden  |  SHURE  |  Sennheiser  |   Tascam   Kramer  |  Tempest   |  Email Us  Visit Us 

Home > Clear-Com > Party-Line > Wireless IFB Intercom > PRC-2  
 Clear-Com PRC-2 UHF Wireless IFB receiver beltpack

Clear-Com PRC-2 receiver beltpack
Product Code: PRC2
Buy Sell Sales Clear-Com PRC-2


Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFB PRC-2 receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate.

The default frequency of the receiver is set by two rotary switches on the side panel. Up to five additional frequencies can also be programmed into the receiver memory using the scan mode.

The design uses +/-20 kHz FM deviation for efficient use of the bandwidth, with compandor noise reduction circuitry for an excellent signal to noise ratio.

The receiver will drive a wide variety of earbuds, headphones and induction neck loops at substantial levels, with loads from 16 Ohms to 600 Ohms.

The receiver is housed in a rugged machined aluminum package. A spring-loaded belt clip provides a secure mounting on a wide variety of belts, pockets and fabrics.
 

Features of PRC-2

· Preset (default) frequency can be set without power or transmitter signal
· Frequency agile with 256 frequencies
· Scan mode stores up to five additional frequencies
· Multi-color LED and rotary control for programming and operation
· High sensitivity for extended operating range indoors or outdoors
· Rugged machined aluminum housing
· Spring-loaded belt clip
·Attached battery door
· 8 hours battery life (alkaline)
· 20 hours battery life (lithium)
 
Technical Details of PRC2
Operating Frequencies: 537.600 to 767.900 MHz (608 to 614 MHz not avail in USA)
 
Frequency control: Crystal Controlled PLL Sensitivity: 1 uv (20 dB SINAD)
 
Signal/Noise ratio: 95 dB A-weighted
 
Squelch quieting 90 dB
 
AM rejection: 50 dB, 10 uV to 100 mV Modulation acceptance: ±20 kHz
 
Spurious rejection: Greater than 70 dB
 
Third order intercept: 0 dBm
 
Frequency response 100 Hz to 10 kHz, (±1db)
 
Pilot tone: 29.997 kHz, 4.5 kHz deviation (fixed crystal controlled)
 
Audio output: 1V RMS into 50 Ohms minimum
 
Antenna: Headphone cable
 
Programmable memory: Switches set default frequency; up to five additional frequencies can be stored in memory
 
Front panel controls: Single knob controls Audio Output Level, Power on, programming and Scan Frequency Selection
 
Indicators: Multi-color LED indicator for power on and battery status. Blinks to indicate channel number and during scanning.
 
Power requirement: 9V alkaline battery lasts about 8 hours
9V lithium battery lasts about 20 hours
 
Power consumption: 60 mA
 
Weight 7.3 oz with battery
 
Size: 3.6 x 2.4 x 0.8 inches (housing only) (belt clip and knob extend beyond the housing)
 

 

Clear-Com

Digital Matrix

Party-Line

Main Stations

CS-702
MS-702
MS-704
SB-704
RCS-2700
RCU-67

Wired Beltpacks

RS-701
RS-702
RS-703

Power Supplies

PK-7
PS-702
PS-704

Remote Stations

RM-702
RM-704

Wall-Mount/Speaker Stations

HB-702
HB-704
KB-701
KB-702
KB-702GM
V-BOX

Interfaces

AC-701
TW-12C
IF4W4
EF-701M
TW-47
TWC-701
TWC-704
Que-Com
SMQ-1
DMQ-2
Wireless IFB Intercom
PRC-2
PTX-3

Program Interrupt (IFB)

AB-120
AX-704
MA-704
PIC-4704
TR-50
TS-1

Accessories

FL-7
MT-1
WP-6

Wireless Intercom

IP Communication

HelixNet

Accessories


Clear-Com 150216

Wireless
HME DX100/DX100C Intercom | MB-100 |
HME DX121 Intercom | BS-121 |
HME DX200/DX200C Intercom | BS-200 | BP-200 |
HME DX210/DX210C Intercom | BS210 | BP-210 | DX410
HME DX300ES Intercom | MB-300ES | BP-300 |
HME PRO850 Intercom | BS-850 | BP-850 | AC850A | BAT-850 | HS15-4F |

AC40A | BAT41 | HS15 | HS16 | MD-XLR Headset Adapter | Beltpack Pouch


Tempest2400 Masterbelt | CB-222
Tempest2400 Digital Wireless Intercom I CM-244 I CM-222 I CP-242 I CP-222 I CCT-DAKIT1 I CCT-RT I T-LP1 I T-BC5 I SG-100 | SG-120
Tempest900 Digital Wireless Intercom | CM-944 | CM-922 | CP-942 | CP-922 | CCT-9RT |
CellCom Digital Wireless Intercom I CellCom-Base I CEL-BP I CEL-TA I CPD2203 I CEL-FS-CHRGR CellCom Accessories
FreeSpeak Digital Wireless Intercom I
FreeSpeak II Base | FreeSpeak II 1.9GHz Beltpack | FreeSpeakII 1.9GHz Transceiver Antenna | FreeSpeak II 2.4GHz Beltpack |
FreeSpeakII 2.4GHz Transceiver Antenna | FreeSpeak II Antenna Splitter |
 FreeSpeak-Base I FS-BP I PD2201 I PD2203 I FCEL-FS-CHRGR I FreeSpeak Accessories

WBS UHF Intercom I WBS-670 I WTR-670 I WBS-680 I WTR-680 I WTR1C I WTR4C I
Wireless IFB Intercom I PRC-2 I PTX-3 I

IP Communications I
Clear-Com Concert | Concert for News Room I SOFT-VoICE I VOICE2 I I HelixNet I I
IKB-12P | HMS-4X I HBP-2X I HLI-2W2 | HLI-4W2 |

Accessories I I Intercom Headsets I CC-300 | CC-400 | CC-40 I CC-60 I CC-25 I CC-26K I CC-27 I HS-15 | HS-15D | HS-16 | HSI16000 | HS4-3
MD-XLR Headset Adapter | Headset Extension Cable |
Intercom Microphones I GM-18 I 110 Microphone I 110/100 I 110/340 I 110/490 I GN Microphone
GN-250 I GN-450 I I Intercom Handsets I HS-6 I PT-7 Cables I YC-36 I SP-3 I
HME DX Series Accessories | DX Base Antenna | DX Antenna Splitter/Combiner | RMK200 Mounting Kit | BAT41 | AC40A | BAT850 | CL200 | SP10 |
DX Beltpack Pouch | CAT-5 Cable | 12VDC Power Supply with Cord | |
Wireless IFB Intercom I PRC-2 I PTX-3 I

Discontinued |
WTR-682 I CC-95 I CC-260 I CAM-IF | DIF-102 | V3R/V6R FX Intercom | WS-200 | RS-601 I RS-602 I RS-603 I WH-200 | WH-210 | WH-300 |
Expandore Singapore India Vietnam Philippine Malaysia Thailand Indonesia