• Clear-com DX410 Wireless Intercom

  • DX410

    Clear-Com Wireless Intercom

  • Clear-com DX410 Wireless Intercom Clear-com DX410 Wireless Intercom

 Clear-com DX410 Wireless Intercom

Home > Clear-Com >Wireless > DX410
  • Clear-com DX410 Wireless Intercom

    Product Code: DX410
    Clear-com DX410 Wireless Intercom


     

     
  • System Highlights:
    - Two channels
    - 7KHz wide bandwidth audio
    - 2-wire and 4-wire bridging
    - 2-wire auto-nulling
    - Lost packet concealment
    - Upgraded radio
    - Supports up to 15 wireless beltpacks and/or wireless headsets

     

DX410: Overview

Clear-Com unveiled the DX410 Wireless Intercom system, a two-channel 2.4GHz digital wireless system. Among the features for the product are 7KHz wide band audio, all-in-one wireless headsets and lightweight beltpacks.

The latest in the DX series, in addition to 7KHz wide band audio, the DX410 also comes with an upgraded radio and a lost packet concealment capability. The DX410 features two-wire and four-wire bridging and two-wire auto-nulling. The bridging capability allows the option for combining the two-wire and four-wire ports together on channel A or B, allowing operators to use a four-wire to send all audio to a mixer, matrix intercom, or other audio source. Two-wire auto-nulling enables fast and accurate integration with Clear-Com or TW wired partyline systems.

Each DX410 base station can support up to 15 BP410 beltpacks and/or WH410 all-in-one headsets. In a single-channel operation, four beltpack users can engaging in simultaneous, full-duplex communication; it allows three users in dual-channel operation. In addition, the BP410 and WH410 offer extended battery life for up to 12 hours.

By operating in a 2.4GHz band, the DX410 does not require radio licensing for use. DX410 is a frequency hopping system and offers spectrum-friendly and Adaptive Frequency Hopping modes.

 

The DX410 is a two channel digital wireless system, delivering an overall better experience in performance, range and sound.

The system features 7KHz wideband audio, the same audio quality level as the high-end wireless intercoms. Its expanded audio range and increased intelligibility enables even soft whispers to be heard clearly, even in high RF interference environments.


DX410 also features 2-wire and 4-wire bridging and 2-wire auto-nulling. The bridging capability allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source. 2-wire auto-nulling enables fast and accurate integration with Clear-Com or TW wired partyline systems.

Each DX410 base station can support up to 15 registered BP410 wireless beltpacks and/or WH410 all-in-one wireless headsets. In a single-channel operation, any four beltpack users can engage in simultaneous, full-duplex (talk-listen) communication, while only three users may be in full-duplex mode in a dual-channel operation.

DX410 is simple to set up and configure, taking less time to deploy. No software programming is necessary.

 

Clear-Com 150216

Wireless
HME DX100/DX100C Intercom | MB-100 |
HME DX121 Intercom | BS-121 |
HME DX200/DX200C Intercom | BS-200 | BP-200 |
HME DX210/DX210C Intercom | BS210 | BP-210 | DX410
HME DX300ES Intercom | MB-300ES | BP-300 |
HME PRO850 Intercom | BS-850 | BP-850 | AC850A | BAT-850 | HS15-4F |

AC40A | BAT41 | HS15 | HS16 | MD-XLR Headset Adapter | Beltpack Pouch


Tempest2400 Masterbelt | CB-222
Tempest2400 Digital Wireless Intercom I CM-244 I CM-222 I CP-242 I CP-222 I CCT-DAKIT1 I CCT-RT I T-LP1 I T-BC5 I SG-100 | SG-120
Tempest900 Digital Wireless Intercom | CM-944 | CM-922 | CP-942 | CP-922 | CCT-9RT |
CellCom Digital Wireless Intercom I CellCom-Base I CEL-BP I CEL-TA I CPD2203 I CEL-FS-CHRGR CellCom Accessories
FreeSpeak Digital Wireless Intercom I
FreeSpeak II Base | FreeSpeak II 1.9GHz Beltpack | FreeSpeakII 1.9GHz Transceiver Antenna | FreeSpeak II 2.4GHz Beltpack |
FreeSpeakII 2.4GHz Transceiver Antenna | FreeSpeak II Antenna Splitter |
 FreeSpeak-Base I FS-BP I PD2201 I PD2203 I FCEL-FS-CHRGR I FreeSpeak Accessories

WBS UHF Intercom I WBS-670 I WTR-670 I WBS-680 I WTR-680 I WTR1C I WTR4C I
Wireless IFB Intercom I PRC-2 I PTX-3 I

IP Communications I
Clear-Com Concert | Concert for News Room I SOFT-VoICE I VOICE2 I I HelixNet I I
IKB-12P | HMS-4X I HBP-2X I HLI-2W2 | HLI-4W2 |

Accessories I I Intercom Headsets I CC-300 | CC-400 | CC-40 I CC-60 I CC-25 I CC-26K I CC-27 I HS-15 | HS-15D | HS-16 | HSI16000 | HS4-3
MD-XLR Headset Adapter | Headset Extension Cable |
Intercom Microphones I GM-18 I 110 Microphone I 110/100 I 110/340 I 110/490 I GN Microphone
GN-250 I GN-450 I I Intercom Handsets I HS-6 I PT-7 Cables I YC-36 I SP-3 I
HME DX Series Accessories | DX Base Antenna | DX Antenna Splitter/Combiner | RMK200 Mounting Kit | BAT41 | AC40A | BAT850 | CL200 | SP10 |
DX Beltpack Pouch | CAT-5 Cable | 12VDC Power Supply with Cord | |
Wireless IFB Intercom I PRC-2 I PTX-3 I

Discontinued |
WTR-682 I CC-95 I CC-260 I CAM-IF | DIF-102 | V3R/V6R FX Intercom | WS-200 | RS-601 I RS-602 I RS-603 I WH-200 | WH-210 | WH-300 |
Expandore Singapore India Vietnam Philippine Malaysia Thailand Indonesia

 
mf-23/09/2015