Clear-Com RS-602

  Homepage | Clear Com | Datavideo | DPA  |  MackieEvent  | Yamaha  |  Steinberg |  JBL  | Sound Devices |  Azden  |  SHURE  |  Sennheiser  |   Tascam   Kramer  |  Tempest   |  Email Us  Visit Us 

Home > Clear-Com > Party-Line > Wired Beltpacks > RS-602

RS- 602 2-Channel Dual Listen Beltpack (uses 6-pin XLR) (Discontinued)

Clear-Com RS-602
Product Code: RS602

 


The RS-602 is a 2-channel, dual listen monaural beltpack with a 4-pin male headset connector and 6-pin female/male loop through intercom line connectors. It requires YC-36 adapter to connect with standard 3-pin cabling, 2.5mm AUX headset connector and an RS-232 data connector for programming.

The beltpack can be programmed using the V-pack software, which does not require beltpack to be opened or any dip switches changed, etc.

Technical Details of RS-602
General Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and short-circuit protected.
Signal to Noise: >75 dB
Bridging Impedance: >15k
Line Level: -14 dB, +5 dB max.
Sidetone Adjust: >35 dB
EMI and RFI rejection: >60 dB
 
Microphone Pre-Amplifier
 
Headset Mic Impedance: 200 Ω
Gain, mic to line: 41 dB (dynamic)
Limiter Range: 26 dB
Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
 
Headphone Amplifier Load Impedance: 50 - 2,000 Ω
Output Level: +17 dBv before clipping
Distortion: <0.1% THD @ 1 kHz
Gain, line to output: +34 dB
Frequency Response: 100 Hz - 18 kHz, ±2dB
 
Program Input Program input : Balanced, transformer isolated
Input sensitivity: –20 dBv to +10 dBv
Frequency response: 50 Hz – 18 Hz, ± 2 dB
 
Connectors Intercom Line: (2) 6-pin XLR–M–F
Headset: 4-pin XLR–M
 
Power Requirements DC Voltage Range: 12-32 volts
 
Environmental 0˚C - 70˚C (32˚F - 158˚F)
0 - 90% relative humidity
 
Dimensions 4.58 in. H x 3.73 in. W x 1.34 in. D
(116 x 95 x 34 mm)
 
Weight 7.8 oz. (0.22 kg)
 
























 

 

Clear-Com

Digital Matrix

Party-Line

Main Stations

CS-702
MS-702
MS-704
SB-704
RCS-2700
RCU-67

Wired Beltpacks

RS-701
RS-702
RS-703

Power Supplies

PK-7
PS-702
PS-704

Remote Stations

RM-702
RM-704

Wall-Mount/Speaker Stations

HB-702
HB-704
KB-701
KB-702
KB-702GM
V-BOX

Interfaces

AC-701
TW-12C
IF4W4
EF-701M
TW-47
TWC-701
TWC-704
Que-Com
SMQ-1
DMQ-2
Wireless IFB Intercom
PRC-2
PTX-3

Program Interrupt (IFB)

AB-120
AX-704
MA-704
PIC-4704
TR-50
TS-1

Accessories

FL-7
MT-1
WP-6

Wireless Intercom

IP Communication

HelixNet

Accessories

 OPTIONAL ACCESSORIES

Analog Partyline Main Stations
Clear-Com CS-702 2-Channel Portable Headset Main Station
Clear-Com MS-702 2-Channel Headset/Speaker Main Station
Clear-Com MS-704 4-Channel Headset/Speaker Main Station
Clear-Com SB-704 4-Channel Switchboard Main Station
Clear-Com RCS-2700 8x 24-Channel Programmable Station-Assignment Panel


Analog Partyline Wired Beltpacks
Clear-Com RS-701 Single Channel Wired Beltpack
Clear-Com RS-702 2-Channel Dual Listen Wired Beltpack (uses 6-pin XLR)
Clear-Com RS-703 2-Channel Dual Listen Wired Beltpack (uses 3-pin XLR)

Analog Partyline Remote Stations
Clear-Com RM-702 2-Channel Headset/Speaker Remote Station
Clear-Com RM-704 4-Channel Headset/Speaker Remote Station


Discontinued 
Clear-Com RCU-67 Remote Control for RCS-2700

Clear-Com RS-601 Single Channel Wired Beltpack
Clear-Com RS-602 2-Channel Dual listen Beltpack (uses 6-pin XLR)
Clear-Com RS-603 2-Channel Dual Listen Beltpack (uses 3-pin XLR)