Power supply |
100-240 V AC, 50/60 Hz
|
Power consumption |
290 W (Approx. 0.08 W in standby mode
with fan stopped)
|
LCD panel*1 |
Panel size |
0.7" (17.78 mm) diagonally |
Aspect ratio |
16:9 aspect ratio |
Display method |
Transparent LCD panel (x 3, R/G/B) |
Pixels |
921,600 (1280 x 720) x 3, total of
2,764,800 pixels |
Lens |
Manual zoom (2x)/Manual focus, F 1.9 -
3.1, f 21.7 mm - 43.1 mm
|
Lamp*2 |
220 W UHM™ lamp
|
Brightness*3 |
2,000 lumens*4
|
Contrast*3 |
6,000:1*4 (full on/full off)
|
Resolution |
RGB: 1280 x 720 pixels (1920 x 1080
pixels with compression)
|
YPBPR signal compatibility |
480i (525i), 480p (525p), 576i (625i),
576p (625p), 720 (750)/50p, 720 (750)/60p,
1,080 (1,125)/24p, 1,080 (1,125)/50i, 1,080
(1,125)/50p, 1,080 (1,125)/60i, 1,080
(1,125)/60p
|
Colour system |
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL
60, SECAM
|
Optical axis shift*5 |
Horizontal ±25% and vertical ±63%
|
Keystone correction range |
Vertical: approx. ±30°
|
Terminals |
HDMI IN |
HDMI connector x 2 |
COMPUTER IN |
D-sub HD 15-pin (female) x 1 |
COMPONENT IN |
RCA pin (Y, PB/CB, PR/CR) x 1 |
S-VIDEO IN |
Mini DIN 4-pin x 1 |
VIDEO IN |
RCA pin x 1 |
SERIAL |
Mini DIN 8-pin x 1 (RS-232C based) |
Dimensions*6 (W x
H x D) |
395 x 112 x 300 mm (15-17/32" x 4-13/32"
x 11-25/32")
|
Weight |
4.9 kg (10.8 lbs.)
|
Operating environment |
Temperature: 0°-40°C (32°–104°F),
Humidity: 20%-80% (no condensation)
|
Supplied accessories |
Power cord, Wireless remote control
unit, Batteries for remote control (AA type
x 2)
|
Optional accessories |
ET-LAX100 |
Replacement lamp unit |
ET-PKX200 |
Ceiling mount bracket |
ET-ADSER |
Serial adapter (DIN 8-pin/D-sub 9-pin) |
| |
|
*1: The projector uses a type of liquid
crystal panel that typically consists of millions of
pixels. This panel is built with very high-precision
technology designed to provide one of the finest
possible images.
Occasionally, a few pixels may remain turned on
(bright) or turned off (dark). Please note that this
is an intrinsic characteristic of the manufacturing
technology that affects all products using LCD
technology.
*2: The projector uses a high-voltage
mercury lamp that contains high internal pressure.
This lamp may break, emitting a large sound, or fail
to illuminate, due to impact or extended use. The
length of time that it takes for the lamp to break
or fail to illuminate varies greatly depending on
individual lamp characteristics and usage
conditions.
*3: Measurement, measuring conditions,
and method of notation all comply with ISO 21118
international standards.
*4: In AI mode, with dynamic iris on
*5: Shift range is limited during
simultaneous horizontal and vertical shifting.
*6: Excluding protrusions
|
