Power supply |
100–240 V AC, 50/60 Hz
|
Power consumption |
240 W (Approx. 0.08 W in standby mode
with fan stopped)
|
LCD panel*1 |
Panel size |
0.74" (17.78 mm) diagonally |
Aspect ratio |
16:9 aspect ratio |
Display method |
Transparent LCD panel (x 3, R/G/B) |
Drive method |
Active matrix |
Pixels |
2,073,600 (1,920 x 1,080) x 3, total of
6,220,800 pixels |
Lens |
Powered zoom (2x)/powered focus, F 1.9 -
3.2, f 22.4 mm–44.8 mm
|
Lamp*2 |
165 W UHM™ lamp
|
Brightness*3 |
1,500 lumens*4
|
Contrast*3 |
16,000:1*4(full on/full off)
|
YPBPR signal compatibility |
480i (525i), 480p (525p), 576i (625i),
576p (625p), 720 (750)/50p, 720 (750)/60p,
1,080 (1,125)/24p, 1,080 (1,125)/50i, 1,080
(1,125)/50p, 1,080 (1,125)/60i, 1,080
(1,125)/60p
|
Colour system |
PAL, PAL-M, PAL-N, PAL 60, SECAM, NTSC,
NTSC 4.43,
|
Optical axis shift*5 |
Horizontal ±40% and vertical ±100%
|
Keystone correction range |
Vertical: approx. ±30°
|
Terminals |
HDMI IN |
HDMI connector x 3 |
COMPUTER IN |
D-sub HD 15-pin (female) x 1 |
COMPONENT IN |
RCA pin (Y, PB/CB, PR/CR) x 2 |
S-VIDEO IN |
Mini DIN 4-pin x 1 |
VIDEO IN |
RCA pin x 1 |
SERIAL |
D-sub 9-pin x 1 (RS-232C based) |
Dimensions*6 (W x
H x D) |
460 x 130 x 300 mm (18-1/8" x 5-1/8" x
11-25/32")
|
Weight |
7.2 kg (15.9 lbs.)
|
Operating environment |
Temperature: 0°-40°C (32°-104°F),
Humidity: 20%-80% (no condensation)
|
Supplied accessories |
Power cord, Wireless remote control
unit, Batteries for remote control (AA type
x 2)
|
Optional accessories |
ET-LAE1000 |
Replacement lamp unit |
ET-PKE2000 |
Ceiling mount bracket for high ceilings |
ET-PKE1000S |
Ceiling mount bracket for low ceilings |
ET-PCE2000 |
Cable cover |
| |
|
*1 The projector uses a type of liquid crystal panel
that typically consists of millions of pixels. This
panel is built with very high-precision technology
designed to provide one of the finest possible
images. Occasionally, a few pixels may remain turned
on (bright) or turned off (dark). Please note that
this is an intrinsic characteristic of the
manufacturing technology that affects all products
using LCD technology.
*2 The projector uses a high-voltage mercury lamp
that contains high internal pressure. This lamp may
break, emitting a large sound, or fail to
illuminate, due to impact or extended use. The
length of time that it takes for the lamp to break
or fail to illuminate varies greatly depending on
individual lamp characteristics and usage
conditions.
*3 Measurement, measuring conditions, and method of
notation all comply with ISO 21118 international
standards.
*4 In AI mode, with dynamic iris on.
*5 Shift range is limited during simultaneous
horizontal and vertical shifting.
*6 Excluding protrusions
|
