|
Top-of-the-line portable projectors with high picture quality, flexible installation, and advanced functions, including
wireless projection*2 and DIGITAL LINK connectivity*2.
*2 For the PT-VZ575N / VW535N / VX605N.
|
| Power supply |
AC120 V, 50/60 Hz (North America),
AC110 V, 60 Hz (Taiwan),
AC100-240 V, 50/60 Hz (other countries) |
| Power consumption |
363 W (North America),
369 W (Taiwan),
369 W (other countries) |
Standby
power
consumption |
Standby Mode (Eco) *1 |
0.2 W (North America), 0.2 W (Taiwan), 0.4 W (other countries) |
| Standby Mode (Normal) |
14 W |
| LCD panel |
Panel size |
16.0 mm (0.63 in) (4:3 aspect ratio) |
| Display method |
Transparent LCD panel (x 3, R/G/B) |
| Pixels |
786,432 (1,024 x 768) x 3, total of 2,359,296 pixels |
| Lens |
1.6x manual zoom (throw ratio: 1.2-1.9:1),
manual focus, F 1.60-1.90, f 15.31-24.64 mm |
| Lamp |
270 W x 1,
lamp replacement cycle (lamp power: Normal/Eco): 5,000 hours/7,000 hours*2 |
| Screen size (diagonal) |
0.76-7.62 m (30-300 in), 4:3 aspect ratio |
| Brightness*3 |
5,500 lm (input signals: PC, lamp power: Normal, picture mode: Dynamic) |
| Center-to-corner uniformity*3 |
85 % |
| Contrast*3 |
10,000:1 (full on/off)
(input signals: PC, lamp power: Normal, picture mode: Dynamic, iris: On) |
| Resolution |
1,024 x 768 pixels*4 |
| Scanning frequency |
HDMI/
DIGITAL LINK |
525i (480i)*3, 625i (576i)*5, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125
(1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, 1125 (1080)/60i,
1125 (1080)/50i,
Displayable resolution: VGA to WUXGA (non-interlace),
Dot clock frequency: 25 MHz to 162 MHz
(compatible with HDCP, DIGITAL LINK not included on PT-VX600) |
| RGB (analog) |
fH: 15-91 kHz, fV: 24-100 Hz, dot clock: 162 MHz or lower |
| YPBPR (YCBCR) |
fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)],
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)],
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p],
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i],
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p],
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF],
fH: 67.50 kHz,
fV: 60 Hz [1080 (1125)/60p],
fH: 15.63 kHz, fV: 50 Hz [576i (625i)],
fH: 31.25 kHz, fV: 50 Hz [576p (625p)],
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p],
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i],
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p],
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p],
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] |
| Video/S-Video |
fH: 15.73 kHz, fV: 59.94 Hz [NTSC / NTSC4.43 / PAL-M / PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL / PAL-N / SECAM] |
| Optical axis shift |
Vertical: +40 %, U/D ratio on top end: 9:1 |
| Keystone correction range |
Vertical: ±35° (auto/manual, input: XGA),
horizontal: ±35° (manual, input: XGA) |
| Installation |
Ceiling/floor, front/rear |
| Terminals |
HDMI IN |
HDMI 19-pin x 2 (compatible with HDCP),
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
| COMPUTER 1 IN |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC x 1) |
COMPUTER 2 IN /
MONITOR OUT |
D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu) |
| VIDEO IN |
Pin jack x 1 (Composite VIDEO) |
| AUDIO 1 IN |
M3 x 1 (L-R x 1) |
AUDIO 2 IN
(MIC IN) |
M3 x 1 (L-R x 1) for audio input or for microphone connection (variable) |
| AUDIO 3 IN |
Pin jack x 2 (L, R x 1) |
| AUDIO OUT |
M3 x 1 (L-R x 1) for output (variable) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| USB A |
USB type-A (for the Memory Viewer) x 1 |
| USB B |
USB type-B (for the USB Display) x 1 |
LAN/
DIGITAL LINK |
RJ-45 x 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection,
100Base-TX, compliant with PJLink™, HDCP compatible, Deep Color compatible) |
| Built-in speaker |
4 cm round shape x 1, output power: 10 W (monaural) |
| Noise level*3 |
37 dB (lamp power: Normal), 29 dB (lamp power: Eco) |
| Cabinet materials |
Molded plastic |
| Dimensions (W x H x D) |
389 x 125.0*6 x 332 mm (15-5/16 x 4-29/32*6 x 13-1/16 in) |
| Weight*7 |
Approx. 4.9 kg (10.8 lbs) |
| Operating temperature |
0°C-40°C [32°F-104°F] (less than 1,200 m [3,937 ft]
above sea level),
0°C-30°C [32°F-86°F] (between 1,200 m and 2,700 m [3,937 ft and 8,858 ft] above sea level)*8 |
| Operating humidity |
20-80 % (no condensation) |
| Wireless |
Standard |
IEEE 802.11a/b/g/n |
| Modulation |
DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO |
Transmission
speed*9 |
IEEE 802.11b: up to 11 Mbps, IEEE 802.11g/a: up to 54 Mbps, IEEE 802.11n: up to 300 Mbps |
| Operating range*10 |
Approx. 30 m (98 ft 5 in) |
| Frequency range |
IEEE802.11a/n: 5.18-5.85 GHz, IEEE802.11b/g/n: 2.4GHz |
Security
(Infrastructure mode) |
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit), WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC], EAP-TTLS [MD5/MS-CHAPv2]) |
| Supplied accessories |
Power cord with power cord holder x 1*11, wireless remote control unit x 1,
batteries (AAA/R03/LR03 type x 2), computer cable x
1,
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Wireless Manager ME 6.2) |
*1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commands can be received for external control using the serial terminal.
*2 The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution
will be converted to 1,024 x 768 pixels.
*5 Pixel-repetition signal (dot clock frequency: 27.0 MHz) only.
*6 With legs at shortest position.
*7 The
above values are averages. Actual values may be different according to the product.
*8 When the ambient operating temperature is 35-40 °C (95-104 °F),
[Lamp Power] will switch automatically to [Eco mode].
*9 This is a theoretical speed. The actual transfer speed varies depending on the usage
environment and connected devices.
*10 Operation range differs depending on environments.
*11 Power cords available (x 2) for the UK and Asia only.
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may
result in fire, malfunction or electric shock.
NOTES ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure.
This lamp may break,
emitting a popping sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the
following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm
(39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between
units. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the
specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to
prevent hot air from the exhaust openings being re-circulated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the
projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage
conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This
is not an indication of faulty lamp performance. |
|
|
