|
|
|
Panasonic Projector PT-AX100E |
|
|
PT-AX100E
- Smooth Screen
Technology
- Dynamic Sharpness Control
- Cinema Colour Management (CCM)
View:
Specifications
Supplied Accessories |
|
|
|
FEATURES |
- Smooth Screen
Technology
- Dynamic Sharpness
Control
- Cinema Colour
Management (CCM)
- Seven Picture Modes
- User Equalising
Function
|
- Scene-Adaptive Resizing
LSI
- Scene-Adaptive MPEG Noise
Reduction
- 10-Bit Full Digital
Processing
- Progressive Cinema Scan
(3/2 Pulldown) and HD IP
|
|
SPECIFICATIONS |
|
Power supply |
100–240 V AC, 50/60 Hz |
|
Power consumption |
290 W (Approx. 0.08 W in standby
mode with fan stopped) |
|
Amps |
2.2 A–1.0 A |
|
LCD panel*1 |
|
Panel size |
0.7? (17.78 mm) diagonally |
|
Aspect ratio |
16:9 aspect ratio |
|
Display method |
Transparent LCD panel (x 3, R/G/B) |
|
Drive method |
Active matrix |
|
Pixels |
921,600 (1280 x 720) x 3
total of 2,764,800 pixels |
 |
|
|
| Lamp*2 |
220 W UHM™ lamp |
| Brightness |
2,000 lumens*1 |
| Contrast |
6,000:1*3 (full on/full off) |
| Centre-to-corner uniformity ratio |
85% |
| Colours |
Full colour (1,070,000,000 colours) |
| Projection size |
1,016–5,080 mm (40–200 inches) diagonally
16:9 aspect ratio |
| Throw distance |
1.2 m–12.4 m (3´11?–40´8?) |
| Screen aspect ratio |
16:9 (4:3 compatible) |
| Resolution |
RGB: 1280 x 720 pixels (1920 x 1080 pixels with compression) |
| Scanning frequency for RGB |
Horizontal: 30–70 kHz,
Vertical: 50–87 Hz |
| YPBPR signal compatibility |
525i (480i), 525p (480p), 625i (576i),625p (576p), 750 (720)/50p,750 (720)/60p, 1,125 (1,080)/24p,1,125 (1,080)/50i, 1,125 (1,080)/50p,1,125 (1,080)/60i, 1,125 (1,080)/60p |
| Colour system |
PAL, PAL-M, PAL-N, PAL 60, SECAM,NTSC, NTSC 4.43, |
| Optical axis shift*4 |
Horizontal ±25% and vertical ±63% |
| Keystone correction range |
Vertical: approx. ±30° |
| Installation |
Ceiling/desk, front/rear (menu selection) |
| OSD languages |
English, French, German, Spanish,Italian, Chinese, Korean, Russian,Swedish, Danish, Norwegian, Polish,Czech, Hungarian, Portuguese, Thai |
| Terminals |
| S-VIDEO IN |
Mini DIN 4-pin x 1, Y: 1.0 Vp-p,
C: 0.286 Vp-p, 75 ohms |
| VIDEO IN |
RCA pin x 1, 1.0 Vp-p, 75 ohms |
| PC (RGB) IN |
D-sub HD 15-pin (female) x 1
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75 ohms
HD/SYNC, VD: TTL, high impedance (positive/negative polarity) |
| COMPONENT IN |
RCA pin (Y, PB/CB, PR/CR) x 1
Y: 1.0 p-p, 75 ohms
PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| HDMI IN |
19-pin HDMI connector x 1 |
| SERIAL |
Mini DIN 8-pin x 1 (RS-232C based) |
| Power cord length |
3 m (9´10?) |
| Cabinet material |
| Dimensions*5 (W x H x D) |
ABS/PC
395 x 112 x 300 mm (15-17/32? x 4-13/32? x 11-25/32?) |
| Weight |
4.9 kg (10.8 lbs.) |
| Operating environment |
Temperature: 0°–40°C (32°–104°F)
Temperature: 0°–40°C (32°–104°F) |
| Remote control unit |
| Power supply |
3 V DC (UM-3 (AA) battery x 2) |
| Operation range |
Approx. 7 m (23´) when operated from directly in front of the signal receptor |
| Dimensions (W x H x D) |
48 x 138 x 28 mm
(1-7/8? x 5-7/16? x 1-3/32?) |
| Weight |
125 g (4.4 oz.) (including batteries) |
| Supplied accessories |
Power cord, Wireless remote control unit,
Batteries for remote control (UM-3 x 2) |
| Optional accessories |
ET-LAX100 : Replacement lamp unit
ET-PKX100 : Ceiling mount bracket
ET-ADSER : Serial adaptor (DIN 8-pin/D-sub 9-pin) |
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology designed to provide one of the finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
*3: In AI mode, with dynamic iris on.
*4: Shift range is limited during simultaneous horizontal and vertical shifting.
*5: Excluding protrusions |
|
|
| |
|
|
