system consist of:
The IRR-106 is the heart
of the Azden 6-Channel IR Conference System.
Using IR to wirelessly transmit, the system
provides instant security, as IR will not
penetrate wlls and can not be "scanned".
Additionally, setup is a snap since no wires
are required between the microphones and the
The receiver provides 6 individual output
connectors, plus an additional "mixed"
output - all with volume control per
channel. As many as four external IR sensors
can be attached to the rear of the receiver
assuring you of great coverage, even in
The IRR-106 can be "rack-mounted" using the
inculded rack ears and is powered by a
small, external power supply.
Sub-carrier Frequency: 2.00 MHz - 3.00 MHz
Type: Super Heterodyne
Reception Sensitivity: >25 dB µV
Reception Selectivity: ± 2 kHz
Audio Output Adjustment: Mic = -20 dB max
Line = 0 dB max
Audio Output Impedence: Mic = <1.5 k ohms
Line = <1 k ohms
Power Requirement: 12 VAC 50-60 Hz
Dimensions: 465 W x 270D x 44H mm (18.3 x
10.62 x 1.57 inches)
The perfect handheld
"pass-around" microphone for, this 6-channel
switchable microphone/transmitter, operates
with Azden's 6-channel conference system. It
is powered by two "AA" batteries (Alkaline
or rechargeable (1HR-3U only)).
Sub-carrier frequencies: 2.00 MHz - 3.00 MHz
Microphone element type: Uni-directional
Frequency Response: 50-9 kHz ±3dB
Battery type: 2-“AA” Alkaline (1.5V x 2 ) or
2-1HR-3U “AA” rechargeable Ni-MH (1.2V x 2 )
Battery life: > 8 hours w/alkaline batteries
Size: 9.65" x approx.1.375" (245 x approx.
Weight: 9.1oz (258g) w/alkaline batteries)
The IRD-60 is an
externally mounted infrared sensor that is
used with the IRR-106 receiver. The sensor
is fitted with an "F" connector and comes
with a ceiling mounting bracket
6CH charger for IRH-56