| Connections |
| SDI Video Inputs |
7, plus monitor in |
| SDI Video Outputs |
9 |
| SDI Video Loop |
7 x reclocked SD, HD, Ultra HD for corresponding inputs. |
| SDI Rates |
270Mb, 1.5G, 3G, 6G, 12G multi rate support |
| Reference Input |
Tri-Sync or Black Burst |
| Reference Loop Output |
Tri-Sync or Black Burst |
| Control Panel Connection |
Ethernet supports 10/100Mbps. Allows direct connection between Ultimatte 12 and Ultimatte Smart Remote 4. |
| GPIO |
5 x GPI In; 1 x GPI Out; 1 x Tally In. |
| Standards |
| SD Video Standards |
625i50 PAL, 525i59.94 NTSC |
| HD Video Standards |
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50,1080p59.94, 1080p60
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
1080i50, 1080i59.94, 1080i60 |
| Ultra HD Video Standards |
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60 |
| SDI Compliance |
SMPTE 259, SMPTE 292, SMPTE 424, SMPTE 2081, SMPTE 2082 |
| Video Sampling |
4:2:2 |
| Color Precision |
10-bit |
| Color Space |
REC 601, REC 709 |
| Software |
| Software Updates |
Using USB-C connection directly connected to Mac OS X™ or Windows™ computers. |
| Configuration |
Ultimatte IP address is set via the Ultimatte setup utility connected via USB. |
| Control System |
| Control Panel Required |
Ultimatte Smart Remote 4 |
| Power Requirements |
| Power Supply |
2 x Internal 100-240V AC, 50/60Hz |
| Power Usage |
100W |
| Physical Installation |
| Physical Installation |
1 Rack Unit Size |
| Environmental Specifications |
| Operating Temperature |
0° to 40°C (32° to 104°F) |
| Storage Temperature |
-20° to 60°C (-4° to 140°F) |
| Relative Humidity |
0% to 90% non-condensing. |
| What's Included |
Ultimatte 12 processor
SD card contains software and manual |
| Warranty |
12 Month Limited Manufacturer's Warranty. |
|