Tempest TMP-R209 900MHz 2-Channel BeltStation

Tempest900 2-Channel Wireless BeltStation

Product Code: TMP-R209

Tempest900 900MHz 2-Channel Wireless BeltStation


Features

  • 2-Channel, full-duplex BeltStation
  • 900MHz, license free operation
  • Dual Talk/Listen operation
  • Backlit LCD screen shows battery life, RF signal strength and more
  • Stage Announce output with relay closure
  • Lithium-Polymer rechargeable battery (or 3 Alkaline AA batteries)
  • Weather resistant enclosure

The Tempest900 wireless 2-Channel BeltStation operates in conjunction with the Tempest900 BaseStations. Each Talk button has individual LED indicators. The Talk button can be latching or momentary. The Call button sends a 2-wire compatible call signal to any wireless BeltStation and any hardwired intercom device on the intercom channel. BeltStations are provided with a rechargeable Li-Polymer battery capable of 9 hours of operation or can be powered by (3) Standard AA Alkaline batteries. Each BeltStation has its own back-lit display and menu functions which allow settings to be changed at the BeltStation locally.

TECHNOLOGY
Each BeltStation user may simultaneously Talk/Listen on A and B or toggle between A and B in “Single Listen” mode. Volume is set by rotating the CH A or CH B rotary control. There are two Talk buttons on each BeltStation, one for each channel. The Talk button enables the microphone signal for the assigned intercom.??The BeltStation comes with an advanced Planar Inverted-F Antenna (PIFA), providing increased range. The BeltStations are fully compatible with all versions of Tempest900 BaseStations and BeltStations.

AUDIO
Each of up to 5 full-duplex wireless BeltStations establishes a unique audio path (point-to-point) with the associated Tempest900 BaseStation delivering an individualized mix minus signal to other BeltStations in the system. Therefore, each BeltStation can monitor a unique mix of intercom channels and other audio sources.

DURABILITY
The BeltStations are made of a weather-resistant ABS co-polymer blend with a high performance polyurethane over-mold.

System Specifiations
RF Frequency     902 to 928 MHz
RF Scheme FHSS with TDMA
Effective Radiated Power 250mW using 2dBi antenna
Receiver Sensitivity -100 dBm for 10-5 BER
Radio Certification FCC Part 15, Canadian RSS-210, license free
Transmission Range 1,000 ft. (304.8 m) under ideal conditions. 500 ft. to 900 ft. (152.4 m to 274.3 m) typical
Audio Dynamic Range >94 dB
Audio Frequency Response 300Hz–3.8KHz with proprietary audio voice shaping
System Latency Less than 60 ms direct
BeltStation Specifications
Intercom Audio Channels 2
Simultaneous Listen Paths True Dual Listen 
Headset Connector 4-pin male XLR
Microphone Type Dynamic or Electret, auto-selected
LCD Display     102 × 80 pixels
Antenna PIFA
USB BeltStation Power Supply Input 100–240 V, 0.3 A, 50–60 Hz, Output 5 V, 1.25 A
Battery Life, Rechargeable Up to 9 hours
Battery Charge Time, Lithium-Polymer Battery Under 3 hours
Optional Power 3 Standard AA alkaline cells
Battery Life, Alkaline Batteries Approximately 4 Hours
Dimensions H 6.1 in. × W 4.0 in. × D 1.75 in. (156 mm × 102 mm × 44.5 mm)
Weight 14.3 oz (405 g)
Operating Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity
  • Multi-blade Charger
  • Tempest CD
  • USB Cable
  • Pairing Cable
  • Li-Poly Battery
  • Quick Start Guide