Tempest TMP-B224 2400MHz 2-Channel Base Station

tempest TMP-B224 2-Channel Base Station
tempest900 TMP-B224   

Tempest2400 2-Channel Base Station

Product Code: TMP-B224

Tempest2400 2400MHz 2-Channel Base Station


Features

  • 2.4GHz worldwide, license free operation
  • Patented Frequency Hopping Spread Spectrum technology
  • 2xTX redundant data transmission
  • Three Modes of Operation: Normal, Shared, and Split
  • Supports up to 5 full duplex BeltStations
  • Unlimited shared BeltStations
  • 2 communication channels (conversations)
  • Mixed 2-wire and 4-wire operation
  • Hardwired Mic Kill and Call compatible
  • Individually assignable Auxiliary IN and OUT
  • BaseStations provide seamless roaming zones
  • Stage Announce output with relay closures
  • Remote Transceiver port for distant antennas
  • 5 individually assignable relay closures
  • LAN interface for remote monitoring and control
  • Either AC and/or DC (battery) operation
  • RoHS compliant

TThe Tempest®2400 2-Channel BaseStation uses a patented Frequency Hopping Spread Spectrum (FHSS), TDMA technology and proprietary ZSync technology, up to eleven Tempest2400 BaseStations and 55 full duplex wireless BeltStations can be operated in close proximity to each other in a single band while maintaining excellent system performance.

PERFORMANCE
The BaseStation comes standard with a single whip antenna (RP-TNC RF connector) and an RJ-45 connector for the (optional) remote transceiver.

Redundant data transmission (2xTX) provides time and frequency diversity yielding outstanding RF performance. The CAT-5/6 cable also supplies power to the remote transceiver. An additional RJ-45 enables remote monitoring and control of the entire wireless system over a Local Area Network (LAN) with the aid of the Tempest T-Desk software.

VERSATILITY
The Tempest BaseStation offers a Stage Announce (SA) output with a relay closure. This is ideal for use with Public Address Systems (PA), city-wide IFB transmitters or virtually any application that can be triggered with a General Purpose Input/Output (GPIO).

MODES
Three modes of operation are available within each Tempest BaseStation: Normal, Shared, and Split. This feature allows from 5 users to hundreds of users depending on configuration.

EXPANDABILITY
Utilizing the Tempest system'ss TDMA technology and proprietary Accu-Sync™ BaseStation coordination, up to 11 Tempest BaseStations and 55 full-duplex wireless BeltStations (in Normal Mode) can be operated in close proximity to each other within the 2.4GHz band while maintaining excellent system performance. By switching to Shared Mode, an unlimited number of BeltStations can be connected to one BaseStation.

ZSYNC TECHNOLOGY
Available exclusively in the Tempest2400 products, the new Seamless Roaming feature enables Tempest users to move freely from a given coverage area to another, with no manual switching between BaseStations required. This capability is powered by the Parallel Sync Generator, which provides an external zero sync source for multiple Tempest BaseStations.

One Parallel Sync Generator supports up to 12 BaseStations in a star configuration allowing removal of individual BaseStations without interrupting sync to any other BaseStation. Multiple Parallel Sync Generators may be linked to support larger installations.

System Specifiations
RF Frequency     2400 to 2480 MHz
RF Scheme FHSS with TDMA
Effective Radiated Power 100mW using 2dBi antenna
Receiver Sensitivity -93 dBm for 10-5 BER
Radio Certification FCC Part 15.247, ETS 300 328 v1.8.1 rules (apply to model numbers ending in “EU” only**), Canadian RSS-210, license free.
Transmission Range 1,000 ft. (304.8 m) under ideal conditions. 500 ft. to 900 ft. (152.4 m to 274.3 m) typical
Audio Dynamic Range >94 dB
Audio Frequency Response 300Hz–3.8KHz with proprietary audio voice shaping
System Latency Less than 50 ms direct
RoHS Compliant Yes
Base Station Specifications
Intercom Audio Channels 2
Shared BeltStations per Base Unlimited  
Full Duplex BeltStations per BaseStation 5
Number of Antenna Ports per BaseStation 1
Antenna Connector Type RP-TNC
Number of Synchronized BaseStations           11
Maximum Range of BaseSync Cable 3,000 ft (914.4 m)
BaseStation/BeltStation Pairing Via supplied Mini-jack/cable
Programming Port USB
Stage Announce and GPO Closures 6 relays via DA-15
2-Wire Intercom Interface 2 channels via XLR 3F with XLR 3M loop thru
2-Wire Intercom Compatibility           Clear Com, RTS, and Balanced compatible
4-Wire/Matrix Connection 2 ports via RJ-45
Aux Input  ¼“ 3 conductor jack accepts -15.5 to +4 dB, balanced, transformer isolated
Aux Output ¼“ 3 conductor jack nominal -12 to +8 dB, balanced, transformer isolated
Stage Announce Output XLR 3M, nominal -12 to +8 dB, balanced, Transformer isolated
Headset Connector 4-pin male XLR (front panel)
Microphone Type Dynamic or Electret, auto-selected
LCD Display     240 × 64 resolution, 32 level gray scale
Dimensions 1 RU unit, H 1.75 in. × W 19.0 in. × D 12 in. (44.5 mm × 482.6 mm × 304.8 mm)
Weight 10.5 lbs (4.76 kg)
Power Input AC: 85–264 VAC at 50–60 Hertz, 15 Watts DC: Battery 11–32 VDC, 12 Watts
Operating Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity
  • Power Cord
  • Antenna (x1)
  • USB A to B Cable
  • USB A to Mini B Cable
  • 1/8' Mini to 1/8' Mini Stereo Cable
  • DB-9 Sync Cable
  • Quick Start Guide
  • Safety