Clear-Com WTR-670 wireless Beltpack

 

WTR-670

Clear-Com WBS UHF Beltpack

Clear-Com WTR-670 wireless Beltpack

 
Home > Clear-Com > Wireless > WBS UHF Intercom > WTR-670  
 Clear-Com WTR-670 Single-channel frequency UHF wireless Beltpack

Clear-Com WTR-670
Product Code: WTR670
Discontinued

review button



SINGLE-CHANNEL FREQUENCY-AGILE UHF WIRELESS INTERCOM BELTPACK

The WTR-670 beltpacks are constructed of extremely light, durable cast magnesium. The detachable antennas are secured to the beltpack via threaded post connectors and thus will not break or damage easily. The beltpacks feature a low-profile volume control and a robust, distinguishable momentary latch talk button.
Specifications of WTR-670
 
BELTPACK
RF Frequency Range: 518 - 608 MHz, 614 - 686 MHz in 18 MHz TX and RX bands
 
WTR-670: G9 band, 844-862 MHz Tx, Germany only
 
Power Requirement: 6 Alkaline “AA” Cells (NiMH optional)
 
Typical Battery Life Alkaline: 14 Hours (Continuous duty with talk light on)
 
Typical Battery Life - Nickel Metal Hydride (1500 mAh): 11 Hours (Continuous duty with talk light on)
 
Current Draw: 140 mA (Push-to-Talk, Talk On)
 
Temperature Range: -4oF to 140oF (20oC to 55oC)
 
Dimensions: 3.75” W x 5.05” H x 1.65” D (9.5 cm x 12.8 cm x 4.2 cm)
 
Weight: 16 oz. (0.454 kg) with batteries 15 oz. (0.425 kg) with batteries
 
Transmit Antenna: 1/4 Wave (supplied), Screw type
 
Receiver Antenna: 1/4 Wave (supplied), Screw type
 
FCC ID: B5DM515
 
Frequency Response: 300 Hz - 8,000 Hz
 
Four-Wire Input: N/A
 
Four-Wire Output: N/A
 
Clear-Com® Party-line Levels: N/A
 
RTS® Party-line Levels: N/A
 
Telex® Party-line Levels: N/A
 
Auxiliary Input: N/A
 
Auliliary Output: N/A
 
 
TRANSMITTER
Type: Synthesized, 720 channels
 
Transmit Power: WTR-680/WTR-670: 50 mW max. (auto-power reduction when close to base)
 
RF Frequency Stability: 0.005%
 
Modulation: FM, 40 KHz Deviation
 
Modulation Limiter: Peak-Responding Compressor
 
Modulation Frequency Range: 300 Hz -8,000 Hz +-2 dB
 
Microphone Audio Input:  30 W - 3,500 W
 
Microphone Input Sensitivity: 9 mV
 
Radiated Harmonics & Spurious: Exceeds FCC specifications
 
FCC Acceptance: Type accepted under FCC Part 74
 
 
RECEIVER
Type: Dual Conversion Superheterodyne, Synthesized, FM, 720 channels
 
RF Sensitivity: <0.7 mV for 12 dB SINAD
 
Signal-to-Noise Ratio: 95 dB
 
IF Selectivity: 3 dB at 230 KHz
 
Image Rejection: 70 dB or better
 
Squelch Quieting: 95 dB
 
RF Frequency Stability: 0.005%
 
Distortion:  <1% at full deviation
 
Local Headset Output: 40mW output into 600 W (1% distortion)
 
FCC Acceptance: Notification under FCC Part 15
 

 

Clear-Com

Wired Intercom

Wireless Intercom

Base Stations

FSE BASE
MB-100
MB340ES
BS-121
BS-210
BS-410

Beltpacks

FSE-BP50
FSII-BP19
FSII-BP24
FSII-BP19-O2
FSII-BP24-O2
BP-200
BP-210
BP-340
BP-410

Headsets

WH220

WH340
WH410

System Sets

HME DX100

HME DX121
HME DX210
HME DX410

Splitter & Transceiver

FSII-SPL
FSII-TCVR-19
FSII-TCVR-IP-19
Intercom Headsets
Intercom Microphones

Accessories

email us

Contact us